SurfPrep 5 inch 60 grit sanding disc describes a round abrasive disc designed for sanding where a 5 inch diameter is required, so installers and shops can match it to tools built for this common disc size. The aluminum oxide abrasive on this disc provides a cutting surface suited for material removal and surface preparation where 60 grit is appropriate. The film backing under the abrasive gives the disc a stable base, which supports consistent contact with the work surface during sanding. This disc uses a PSA, or pressure sensitive adhesive, backing, so it bonds to a compatible 5 inch sanding pad when pressed into place. The no hole design specifies that the disc surface is continuous, which matches tools and workflows that use solid pads. The silver color identification on the disc helps crews recognize this specific SurfPrep abrasive at a glance in a busy shop.
This SurfPrep sanding disc is specified as 5 inch, so it pairs with 5 inch sanding pads designed for that size. The PSA backing means the disc attaches by pressing the adhesive side onto a suitable pad surface, creating a bond for sanding passes. The no hole description calls out that the disc does not have vacuum or vent patterns, aligning it with solid pad systems. The film base beneath the aluminum oxide abrasive keeps the disc profile thin while still giving it structure over the pad face. Together, these details define how the disc fits onto sanding tools and how it behaves under load on cabinets, panels, and other flat work.
The SurfPrep 5 inch 60 grit no hole aluminum oxide PSA sanding disc on film is built for sanding operations where a 5 inch disc footprint suits the job layout. The 60 grit specification puts this disc in a coarser range, which is useful when surfaces need noticeable cutting rather than light touch-up. With aluminum oxide as the abrasive, the disc applies a defined scratch pattern that prepares surfaces for follow-up steps using finer grits. The film backing sits directly under the abrasive layer, keeping the disc flexible yet supported as it moves over edges and flat sections. Because the design is no hole, the full face of the disc presents abrasive material to the workpiece, which can help when coverage across the disc area is a priority in the process.
The PSA backing on this SurfPrep disc allows it to grip a compatible pad across the full 5 inch diameter, which helps maintain alignment during repetitive passes. This pressure sensitive adhesive interface supports consistent contact between the disc and the pad, which is important when sanding large panels or multiple similar parts. The film base under the aluminum oxide abrasive keeps the disc thin and stable, helping the abrasive stay in even contact with the surface as the tool moves. The 60 grit rating sets expectations for the level of cut, so crews can pair this disc with specific stages in their sanding sequence. The no hole construction keeps the working surface continuous, supporting workflows and pads built around solid-face sanding where uniform abrasive coverage is valued.
The SurfPrep SP5PSAF060 sanding disc is specified as 5 inch diameter, so it matches sanding tools and pads designed around a 5 inch disc format for consistent coverage.
This SurfPrep film disc is rated at 60 grit, so it serves in sanding steps that call for a coarser abrasive to remove material or level surfaces before finer grits.
The 5 inch disc uses aluminum oxide as the abrasive, which delivers the actual cutting action on the work surface during sanding tasks.
The PSA backing on this disc uses pressure sensitive adhesive, so pressing it onto a suitable pad creates a bond that holds during sanding passes.
No hole means the disc has a continuous abrasive face without vent or vacuum holes, which pairs with solid sanding pads that match this design.
The film backing forms the base under the aluminum oxide abrasive, helping the 5 inch disc stay flat while still flexing over surfaces during sanding.
The SurfPrep 5 inch 60 grit no hole aluminum oxide PSA sanding disc on film, silver, offers a defined combination of size, abrasive type, grit, backing, and attachment method. These details let shops match the disc to 5 inch tools, solid pads, and sanding stages that benefit from 60 grit aluminum oxide on a film base. For projects that call for this level of cut and this attachment style, SP5PSAF060 provides a clearly identified SurfPrep option ready to slot into existing abrasive routines.
Sold In: 1 Box