2" x 10" Enterprise Counter Mounted Support Bracket, Black Finish

Enterprise Counter Mounted Support For Bar Tops

Enterprise counter mounted support creates a secondary bar by attaching to the top of your base counter, so you can build a raised serving or work surface directly off an existing sub-counter. A rectangular footplate bolts to the top of the sub-counter, providing a solid base that ties the support into the cabinet structure for stable performance. A gusset extends from the footplate to the 10 inch top plate, bracing the upright and reducing flex under typical bar loads. The top plate on this Enterprise counter mounted support carries your bar granite or glass, giving you a clean, elevated surface using common bar-top materials. Rated carry capacity of 500 pounds each allows each support to handle substantial bar or workstation loads when spaced appropriately across the run.

Key Enterprise Counter Support Details In Use

• The 10 inch top plate provides a defined bearing surface for the bar granite or glass, so the load transfers directly into the bracket instead of relying on the stone alone.
• The Enterprise support will hold up to an 18 inch deep counter, allowing use with typical bar overhangs while keeping the load within the supported footprint.
• Material thickness of 0.25 inch gives the bracket a substantial cross-section, which resists bending when the bar is loaded in normal service.
• Carry capacity of 500 pounds each supports heavy bar tops or work surfaces, allowing fewer supports along the span while maintaining structural performance.
• One 0.50 inch countersunk hole in the footplate creates a flush fastener bearing point, helping the support seat flat against the sub-counter for consistent installation.
• Black finish option provides a dark, discrete appearance, which helps the support visually recess under many stone or glass bar designs.

Installation Factors For This Counter Support

The Enterprise countertop mounted support uses a rectangular footplate that bolts to the top of your sub-counter, so the bracket fastens from above rather than from a wall or cabinet face. The design is a special install that relies on prefabricated holes in granite or other stone, or predrilled holes in wood counters, sized for a 1/4 inch diameter flat head bolt. This approach lets the bar material clamp to the 10 inch top plate through the bolt pattern, tying the counter surface directly to the bracket structure. The single 0.50 inch countersunk hole in the bracket provides a flush fastener seat, helping the installed support sit level under the finished bar surface.

Using This Workstation And Countertop Bracket

Where This Enterprise Counter Support Fits Best

This Enterprise counter mounted support by Federal Brace is part of the workstation and countertop brackets class, so it is intended for applications where a secondary bar rises off an existing counter. By attaching to the top of your base counter, it suits bar-style layouts that extend from a sub-counter rather than from a wall, such as raised serving lines or pass-through bars. The 10 inch top plate is designed to carry bar granite or glass, so it works with stone or glass tops that are fabricated to rest on the plate. Because the support will hold up to an 18 inch deep counter, it aligns with many common bar depths found in residential and light commercial projects. The 6 inch size and 0.25 inch material thickness create a compact but substantial bracket that fits under a narrow bar rise while still supporting typical spans when spaced along the counter. Black finish gives the support a subdued look that blends under dark tops or contrasts under lighter materials, depending on the design approach.

Details That Support Repeatable Bar Installations

The Enterprise countertop mounted bracket uses a gusset between the rectangular footplate and the top plate, which stiffens the vertical section and helps maintain alignment of the bar surface under loading. This bracing reduces deflection at the outer edge of an 18 inch deep counter, keeping the bar feel consistent along its length. With a carry capacity of 500 pounds each, installers can calculate bracket spacing across the bar run using the rated load rather than trial and error, aiding layout planning. The requirement for prefabricated holes in granite or other stone, or predrilled holes in wood counters, to fit a 1/4 inch diameter flat head bolt means the attachment method is defined in advance, supporting coordinated work between fabricator and installer. The single 0.50 inch countersunk hole in the bracket is shaped for a flat seated fastener, which helps the support draw tight to the sub-counter without rocking as the bolt is tightened. Availability in both stainless steel and black finishes allows coordination with other visible metal elements on the project while using the same basic installation geometry.

Common Questions About This Counter Support Bracket

Selecting This Enterprise Support For Your Project

The Enterprise counter mounted support 10x2x6 black ties directly into your sub-counter, providing a defined structure for a secondary bar above an existing surface. With a 10 inch top plate designed for bar granite or glass, support for up to an 18 inch deep counter, and a 500 pound carry capacity, it aligns with many bar and workstation layouts. The 0.25 inch material thickness, gusseted design, and 0.50 inch countersunk mounting hole provide a clear fastening and support approach when planning your next counter-mounted bar run.