Enterprise Counter Mounted Support For Secondary Bars

Enterprise counter mounted support by Federal Brace attaches to the top of your base counter to create a secondary bar, so you can build elevated serving or work surfaces directly above an existing sub-counter. A rectangular footplate bolts to the top of your sub-counter, providing a fixed base that transfers bar loads down into the counter structure. A gusset extends from this footplate to the 10 inch top plate, giving the bracket a rigid triangle that helps resist flex under everyday bar use. The 10 inch top plate allows installation of bar granite or glass, so the same bracket supports different surfacing materials in bar-height applications. This Enterprise counter mounted support will hold up to an 18 inch deep counter, helping you span typical bar overhangs while staying within the stated capacity. As part of Federal Brace workstation and countertop brackets, this bracket is configured specifically for counter-mounted bar construction.

Key Counter Support Details For Bar Projects

• The 10 inch top plate provides a defined bearing surface for granite or glass, which helps distribute weight along the plate during installation and use.
• The Enterprise counter mounted support will hold up to an 18 inch deep counter, allowing typical bar-depth surfaces to be carried off the base counter structure.
• Carry capacity is 500 pounds each, so each bracket is rated for substantial static loading when laid out appropriately under the bar span.
• Material thickness is 0.25 inch, giving the bracket a solid steel section that resists bending in normal counter support applications.
• The Enterprise Support comes in brushed stainless steel and raw steel materials, so projects can match a stainless steel finish appearance or use raw steel where a different finish will be applied.
• Size is listed as 6 inch, aligning the bracket to the specified Enterprise counter support 10x2x6 product configuration.
• The stainless steel finish option on this model offers a clean metallic look that coordinates with many contemporary bar and kitchen designs.

Installation Details For Enterprise Counter Support

The Enterprise counter mounted support uses a rectangular footplate that bolts to the top of your sub-counter, so the load path runs directly into the structural counter base. This Enterprise Countertop Mounted Support has one 0.50 inch countersunk hole, giving a defined bolt location that seats a flat head fastener flush to the plate. The installation of Enterprise Countertop Mounted Brackets is described as a special install, because it requires preparation of the countertop materials for the fasteners. Granite or other stone materials need to be prefabricated with holes that fit a 0.25 inch diameter flat head bolt, and wood counters need to be predrilled for the same 0.25 inch diameter flat head bolt, so the bracket ties securely into the finished surface.

Using Enterprise Counter Support In Real Projects

Where This Counter Support Bracket Is Applied

The Enterprise counter mounted support by Federal Brace is used on the top of a base counter to create a secondary bar, so it fits bar-height build-outs over existing cabinets or work surfaces. A rectangular footplate bolts to the top of your sub-counter, placing the support directly over cabinetry or structural framing where loads can be carried. The gusset that extends to the 10 inch top plate forms a rigid triangle, which supports the bar granite or glass during daily use. This Enterprise counter mounted support will hold up to an 18 inch deep counter, so it fits many common bar overhang and serving counter depths. As a workstation and countertop bracket, it works wherever a raised bar or counter extension is required above a primary counter run.

Why These Mounting Details Support Consistent Results

The 0.25 inch material thickness gives the Enterprise counter mounted support a substantial section, helping the bracket stay true under the 500 pound each carry capacity when positioned correctly along the bar. A single 0.50 inch countersunk hole in the footplate focuses clamping force from a flat head bolt, so the bracket seats firmly against the sub-counter. Prefabricated or predrilled holes sized for a 0.25 inch diameter flat head bolt allow the fastener head to sit into the surfacing, tying the bar granite, glass, or wood directly to the 10 inch top plate. This connection means the bar surface works together with the bracket during loading rather than shifting independently. The stainless steel finish option on this Enterprise counter support 10x2x6 model visually coordinates with many stainless-clad appliances and fixtures, maintaining a consistent look in bar and kitchen environments.

Common Questions About Enterprise Counter Support

Selecting This Stainless Enterprise Counter Support

The Enterprise counter mounted support by Federal Brace combines a 10 inch top plate, rectangular bolting footplate, and 0.25 inch thick steel to serve bar-height counter projects. This Enterprise counter support 10x2x6 model in stainless steel finish is rated for 500 pounds each and will hold up to an 18 inch deep counter, so it fits many elevated bar layouts. For secondary bar construction over existing counters using granite, glass, or wood, this workstation and countertop bracket provides defined dimensions, material thickness, and fastener interface for planned layouts.