Kensington Maple Edgebanding 3mm Thick, 15/16” Width x 300 FT

Kensington Maple Edgebanding For Finished Panel Edges

Kensington Maple edgebanding defines this product as a dedicated edge treatment for panels where a Kensington Maple look is required. The 3mm thick construction creates a substantial edge profile, which helps panels feel more solid at doors, drawer fronts, and exposed ends.

The 15/16 inch width is sized to cover standard 3/4 inch panels with overhang for trimming, which supports clean flush edges after routing or scraping. The 300 FT length provides a continuous run for multiple cabinets or casework projects, which reduces splice joints along long stretches.

The PVC material places this product in the PVC edgebanding category, which gives a consistent, machinable edge suited to typical woodworking shop tools. The Kensington Maple design ties the edge visually to Kensington Maple surfaces, which supports a unified appearance across doors, drawer fronts, and cabinet sides.

The product is identified as edge banding in the Edgebanding & Surfacing category, so it is intended to finish raw panel edges rather than large faces, which keeps its role clear in the shop workflow.

Key Kensington Maple PVC Edge Banding Advantages

• The 3mm thick profile builds a pronounced edge, which helps create a more furniture-like feel on cabinet doors and shelves.
• The 15/16 inch width gives trimming allowance over a 3/4 inch board, which supports tight, chip-free edges after machining.
• The 300 FT roll length supports longer runs of casework, which helps keep color and pattern consistent across multiple units.
• The Kensington Maple design ties into Kensington Maple projects, which keeps edge tone coordinated with matching surfaces.
• The PVC edgebanding classification signals a workability suited to standard shop processes, which fits routing, scraping, and sanding steps.

Installation Fit For 15/16 x 3mm PVC Edge Banding

The 15/16 inch width on this Kensington Maple edgebanding gives coverage beyond a typical 3/4 inch substrate, which leaves controlled overhang for edge trimmers. The 3mm thickness offers a robust edge band that can be machined without feeling fragile at corners.

Being PVC edgebanding means the material is designed to respond predictably under normal shop handling, which supports smooth edges after trimming and finishing passes. The 300 FT length per roll allows extended installation without frequent roll changes, which supports steady production flow across cabinet runs or built-ins.

The manufacturer designation as edge banding and the specified dimensions position this product for use on exposed panel edges rather than surface laminating, which keeps its application focused where a defined Kensington Maple edge is required.

Using Kensington Maple Edge Banding In Projects

Where Kensington Maple Edgebanding Works Best

This Kensington Maple edgebanding is defined by its place in the Edgebanding & Surfacing category, which targets cabinet and casework projects that need finished edges matching Kensington Maple surfaces. The 3mm thickness supports use on door and drawer front edges where a stronger edge presence is desired.

The 15/16 inch width aligns with edging 3/4 inch sheet goods that are common in cabinet construction, which suits shelving, cabinet sides, toe kicks, and finished end panels that need a Kensington Maple edge. The 300 FT length offers enough material to handle multiple cabinets in a single project run, which supports consistent Kensington Maple tone across an entire installation.

The identification as PVC edgebanding specifies that the material type is PVC, which suits shop environments already using PVC edge banding in their standard builds. The Kensington Maple description connects the roll directly to Kensington Maple color schemes, which matters when panels, doors, and mouldings reference Kensington Maple finishes.

Why These Dimensions Support Repeatable Results

The 3mm thickness of this edge banding establishes a consistent, heavier edge that stands up to normal machining, which helps maintain a straight, clean profile after trimming and light sanding. The 15/16 inch width provides repeatable overhang across standard panels, which simplifies setup for edge banding equipment because technicians can rely on uniform excess to trim away.

The 300 FT roll length defines a sizable continuous supply of Kensington Maple PVC edgebanding, which reduces project interruptions to change rolls and helps keep color and grain pattern uniform along door banks and wall runs. The PVC classification signals that it behaves as a PVC edge band, which supports predictable cutting and finishing steps, aiding in reduced rework.

The product class as Edge Banding and the manufacturer part number 301383-058 give a precise identity in inventory systems, which helps shops reorder the same Kensington Maple edgebanding for future phases and maintain visual continuity across repeat jobs.

Common Questions About Kensington Maple Edge Banding

Select Kensington Maple Edgebanding For Matching Edges

This Kensington Maple edgebanding from Rehau, Inc. combines a 3mm thickness, 15/16 inch width, and 300 FT length to address Kensington Maple projects that rely on PVC edge banding. These verified dimensions support edging standard 3/4 inch sheet goods used in cabinets and casework.

The defined role as Edge Banding in the Edgebanding & Surfacing category and the Kensington Maple identification let shops tie edges directly to Kensington Maple surfaces. For projects built around this finish, this 301383-058 PVC edgebanding offers a consistent way to carry the Kensington Maple look across exposed panel edges.