Fulterer 36" Full Extension Ball Bearing Drawer Slides, Unhanded Side Mount Zinc - 5514

Fulterer 36 Inch Ball Bearing Drawer Slides

Fulterer 36 inch ball bearing drawer slides provide a full extension action, so the drawer travels the complete length of the 36 inch slide and exposes the full drawer depth for direct access to stored contents during everyday use and service work. These slides are built as heavy duty ball bearing slides, which supports demanding drawer applications where stable, smooth travel matters under substantial loads in cabinets or shop fixtures. The design is non-handed, so the same 5514 slide works on either the left or right side of the drawer, simplifying layout and reducing part variation across a project. As side mount drawer slides, they position on the sides of the drawer box and cabinet, keeping the drawer support fully accessible during mounting, alignment, and later adjustment in the field. The zinc finish provides a clean, uniform appearance that suits typical shop and cabinet environments.

Heavy Duty Features That Support Demanding Drawers

• The ball bearing construction delivers guided movement along the length of the 36 inch slide, which helps drawers open and close smoothly under heavy use and heavier loads in cabinets or storage pullouts.
• The 36 inch full extension length allows the drawer to travel its complete length, which opens the entire drawer box and helps reach tools, parts, or materials stored at the back without awkward reach.
• The heavy duty design described in the product data focuses the 5514 slide on higher load applications, which supports use in shop cabinets, utility drawers, or storage pullouts that see frequent cycles.
• The zinc finish creates a consistent surface on the slide members, which supports a uniform appearance in the installation and helps visually match other zinc hardware used in the same cabinet run.
• The identification as a side mount drawer slide defines its mounting orientation on the drawer sides, which helps integrate the 5514 into standard side mount cabinet constructions and shop-built drawer systems.

Side Mount Drawer Slide Installation Use

This product is classified as a side mount drawer slide, so it is intended to fasten along the sides of the drawer box and corresponding cabinet members, which fits common cabinet construction methods and straightforward jig-based installation. Being a full extension 36 inch slide, it requires cabinetry and drawer depths matched to the slide length, which keeps the movement linear and stable from closed to fully open positions. The non-detachable description indicates the slide members remain connected in normal use, so drawers stay captured on the slide system during operation and when fully extended. Flat mounting is stated as possible, which means the slide can be set in a flat orientation where appropriate installation conditions are present in the design.

Using Fulterer 5514 Slides In Cabinet Projects

Where These 36 Inch Slides Are Applied

The 5514 ball bearing drawer slide from Fulterer USA, Inc. sits in the Side Mount Drawer Slides product class, which places it in typical cabinet drawers, workbench storage, and other side-mounted pullouts that benefit from guided, linear motion. The 36 inch full extension format fits longer drawers, where access to the entire length is important for tools, components, or materials stored deep in the box. Because the slide is non-handed and described as symmetrical in design, one slide pattern serves both drawer sides, which helps keep parts lists simple on multi-drawer builds and reduces separate left and right stocking. The non-detachable function keeps the drawer and slide connected in service, which suits installations where the drawer is expected to remain captive during normal operation.

Why Symmetrical Non-Handed Design Matters

The symmetrical design described for the 5514 ball bearing drawer slide allows it to be used on both sides of the drawer, which simplifies installation decisions when laying out left and right members during cabinet assembly. Being non-handed means installers do not sort between mirror-image parts, which can reduce orientation errors on the bench and speed repetitive production work. The non-detachable feature keeps the slide members together during travel, which supports consistent tracking over the full 36 inch extension and keeps the drawer supported as it reaches its outer position. Flat mounting is stated as possible for this slide, which adds a layout option where design conditions call for a flat orientation while still using the same heavy duty ball bearing construction. Overall, these characteristics focus the 5514 on straightforward, repeatable use in projects that rely on side mounting and full extension reach.

Common Questions About Fulterer 5514 Drawer Slides

Choose Fulterer 5514 Slides For Full Extension Reach

The Fulterer 36 inch full extension ball bearing drawer slides provide heavy duty support, which suits demanding drawer applications where full length access is important on every cycle. Their side mount, non-handed, symmetrical design means the same 5514 slide serves either drawer side, which streamlines planning and simplifies installation across multiple cabinet openings. With flat mounting possible and a zinc finish, these Fulterer USA, Inc. slides align well with shop-built drawers and cabinetry that depend on predictable, smooth full extension action.