Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This is a 22 inch full-extension side-mount ball bearing drawer slide from Fulterer, rated 550 lb per pair, with a zinc finish and standard-motion ball bearing action. Designed for industrial, shop, and institutional drawers where load capacity is the primary selection criterion.
Most side-mount ball bearing slides are engineered around the kitchen cabinet — 100 lb per pair covers the average drawer full of pots and pans. The Fulterer 5507 is built for a different job. At 550 lb per pair, it is the right call for tool chest drawers carrying impact wrenches and sockets, shop bench drawers loaded with heavy bar stock, server room pull-outs supporting loaded equipment chassis, and institutional or commercial storage where drawers are opened under real working loads day after day. The 22 inch length suits a standard-depth cabinet or bench, and full extension means nothing stays buried at the back of the box.
The slide is formed from steel with a zinc plated finish. Zinc is the working standard for side-mount ball bearing slides intended for dry indoor environments: it resists incidental moisture and the minor abrasion that comes with heavy-use shop settings, and it does not compete with the aesthetics of the cabinet because the slide is mostly hidden beside the open drawer box. The ball bearings run in full-length raceways formed into the steel members, keeping travel consistent across the full 22 inch travel length even when the pair is loaded near its rated capacity.
Cabinet shops building custom shop furniture, contractors fitting out tool rooms, and institutions specifying storage for maintenance facilities will all find the 5507 a logical fit. Homeowners tackling a serious garage workshop build get the same industrial-grade slide without an industrial price premium. The non-handed design means fewer part numbers to track, and the standard-motion action is the right choice for any installation where push-to-open, soft-close, or a self-close spring would interfere with the intended use. Build the drawer box 1 inch narrower than the cabinet opening to leave 1/2 inch of side clearance for each slide. In face-frame cabinets, rear mounting brackets are required to support the back end of the slide; brackets for this series are sold separately.
Per pair. Install one slide on each side of the drawer and the pair together carries 550 lb. Do not divide the rating by two to size a single-slide application.
On a level cabinet it will stay where it is left. Standard motion means there is no closing mechanism of any kind — no detent, no spring, no damper. If the cabinet surface is not level, or if vibration is a factor, specify a hold-in detent version instead.
No. The design is non-handed, so both slides in the pair are identical. Order the quantity matching your drawer count.
Build 1/2 inch of clearance between the drawer box side and the cabinet interior for each slide — that means the drawer box should be 1 inch narrower than the opening overall.
Yes, but face-frame construction requires rear mounting brackets to support the back end of the slide. The brackets are series-specific and sold separately — do not substitute generic brackets from another slide line.
When the drawer carries real weight and downtime is not an option, specifying the correct load class from the start is the straightforward move. The Fulterer 5507 delivers 550 lb capacity and full extension in a standard zinc side-mount format that installs without surprises.
Sold In: 4 Set
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 2 Set |  FTFR5400-12BRKT Mfr# 5527 | Fulterer 12" Side Mount Bracket, Unhanded Zinc - 5527 |
