Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This is a 58 inch full-extension side-mount ball bearing drawer slide from Fulterer's heavy-duty line, rated 550 lb per pair in zinc-finished steel. It is designed for the large-format drawers, industrial cabinets, and workshop storage applications where standard-class cabinet slides simply are not rated for the job.
At 58 inches, this slide suits deep workbench drawers, machinery cabinets, and large-format shop storage where standard 24-to-30-inch cabinet slides never reach. The 550 lb per-pair rating covers drawers loaded with heavy tooling, machined parts, fastener stock, or dense shop supplies. Full extension means the back of even a deep drawer comes all the way out to the cabinet face — no reaching past the front edge to find what is buried at the rear. Because the slide uses standard motion (no soft-close, no self-close, no detent), the drawer stays open or closed exactly where it is left, which suits applications where the drawer is accessed heavily and a closing mechanism would create friction rather than convenience.
The slide is built from steel with a zinc finish — the corrosion-resistant standard for side-mount ball bearing slides intended for indoor industrial and shop service. Zinc protects the steel members through years of heavy use in environments that would degrade a bare or painted finish. It is a functional, not decorative, coating; the slide sits beside the drawer box and is largely out of sight in use. For outdoor, wet, or washdown environments, zinc-plated steel is not the appropriate choice — this slide is specified for dry indoor work.
Cabinet shops outfitting industrial workbenches, shop furniture builders specifying large-format drawers, and contractors sourcing hardware for machinery or equipment storage cabinets will find this slide fits a gap that standard kitchen-class hardware cannot cover. The 550 lb rating and 58 inch length together address drawers that are too deep and too heavy for the slides stocked for residential cabinetry. The non-handed design simplifies ordering at volume — one part number covers both sides of every drawer in the run.
No. 58 inches is the closed length of the slide. Because this is a full-extension slide, the drawer member travels approximately the full slide length, bringing the entire drawer out past the cabinet face. Slide length and travel distance are two different specs.
The 550 lb rating is per pair. That is the working capacity for two slides installed one on each side of the drawer box.
No. This is a standard-motion slide — no damper, no spring, no detent. The drawer rides the ball bearings and stays wherever it is left. If a closing feature is required, a different model in the Fulterer line covers that.
No. The slide is non-handed — both pieces in a pair are identical and either one fits either side of the drawer.
Side-mount ball bearing slides need support at the rear in face-frame construction. Add compatible rear mounting brackets for the back end of the slide in a face-frame install. Brackets are sold separately and should be confirmed as compatible with this series before ordering.
When the drawer is deep, the load is heavy, and the hardware needs to hold up in a demanding shop or industrial environment, the zinc-finished steel construction and 550 lb per-pair rating of this 58 inch full-extension slide match the work to the hardware.
Sold In: 1 Set
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 2 Set |  FTFR5400-12BRKT Mfr# 5527 | Fulterer 12" Side Mount Bracket, Unhanded Zinc - 5527 |
