Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Salice F70 is a 15 inch full-extension undermount slide built for face-frame cabinets with handle-less fronts. It operates on a mechanical push-to-open mechanism and is rated 170 lb per pair, placing it well into heavy-duty territory for a concealed runner.
This slide is the right choice when the design calls for clean, hardware-free drawer fronts in a traditionally framed cabinet. The push-to-open mechanism triggers with a light press and ejects the drawer so the front needs no pull or knob. Because this is the mechanical push-to-open model, closing is free-rolling without damping. If a damped, silent close is the priority rather than touch opening, a soft-close model in this line is the better fit. For installs that require both push-to-open and soft-close, look for a combined system — this model does not include both.
Face-frame construction requires rear bracket support at the back of the slide. In this cabinet type, the rear end of each slide must be supported by the matching series-specific rear mounting brackets, positioned behind the face frame. This hardware is not interchangeable with other brands or other series and should be confirmed as part of the order before the job starts.
Steel members with a zinc finish stand up to daily use in indoor cabinetry, and the concealed undermount position keeps all hardware out of sight when the drawer is open. The 170 lb per pair capacity makes this one of the higher-rated options in the undermount segment, suited to base cabinet drawers carrying real loads such as cast iron cookware, stacked plates, or pantry staples. That rating is per pair and is the Salice-stated figure for this series.
The side-thickness range of 1/2 to 3/4 inch is broader than most undermount lines, which typically top out at 5/8 inch. This means the F70 accommodates both the standard 5/8 inch dovetailed box and the thicker 3/4 inch plywood or hardwood box without switching to a separate model. The drawer box must still be built to Salice's specification for the F70 series, including the correct box width, bottom recess, rear notch, and locking-device drilling. An unmodified or off-spec box will not seat correctly on these slides.
This 15 inch slide suits shallower base cabinet drawers where the box depth runs shorter than a standard 18 or 21 inch run, such as island utility drawers, smaller vanity drawers built on face-frame boxes, or secondary storage drawers in a kitchen where the primary bank runs deeper. The 170 lb rating means the capacity never becomes the limiting factor, even in production shops building for clients who demand heavy-duty concealed hardware in a traditional framed cabinet. Designers specifying handle-less aesthetics on face-frame boxes — a combination that narrows the available product field — will find the F70 one of the few lines that covers both requirements together.
No. This is the mechanical push-to-open version. The drawer closes without a damper, so the close speed depends on how firmly the drawer is pushed in. Choose a soft-close model if damped closing is the priority, or ask about combined push-to-open and soft-close options in the F70 line.
Confirm the sold-as unit with the product listing. Salice F70 slides are generally sold as pairs for face-frame installations, but verify quantity before ordering to avoid a half-set arriving on the job.
Yes. Face-frame cabinets require rear mounting brackets to support the back end of the slide behind the frame. These brackets are F70 series-specific and do not interchange with other brands or lines. Include them in your order.
Salice F70 front locking devices are series-specific clips; confirm whether they are included with this SKU or need to be ordered separately before placing a production run.
The push-to-open trigger requires the drawer front to have enough gap to travel and spring back. An inset-tight front that leaves no room for movement will defeat the mechanism. Follow Salice's installation specification for the required front clearance on the F70.
The Salice F70 in 15 inches covers a specific intersection of needs — face-frame construction, handle-less fronts, and loads that exceed what standard undermounts handle — and does it in a compact slide length that fits shallower drawers without compromise.
Sold In: 1 Set
