Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Salice F70 30 inch push-to-open undermount slide is a full-extension, concealed runner built for frameless cabinets and handle-less fronts. It carries 170 lb per pair — well above the standard undermount range — making it a practical choice anywhere a deep drawer runs heavy and a clean front matters.
A 30 inch undermount pairs naturally with deep base cabinets: full-depth pot drawers, wide pantry pull-outs, deep utility drawers in laundry rooms, and lower runs in modern handle-less kitchens where hardware-free fronts are part of the design. At 170 lb capacity, the slide keeps up with loaded cooking drawers carrying cast iron, stacked sheet pans, or heavy utensil sets. Push-to-open is especially useful at 30 inches of depth, where a pull location that works at 21 inches can feel awkward on a longer front. A press in the center of the door does the job cleanly.
This is a mechanical push-to-open model. The drawer ejects on a spring and closes without damping — there is no soft-close on this version. If a damped, silent close is the priority for the application, a soft-close model is the right call instead; this slide and a soft-close model serve different needs and are separate versions within the F70 line. The steel members carry a zinc finish that holds up to indoor service without adding visible hardware to the cabinet interior.
This SKU is the right specification for frameless cabinet construction. The slide mounts directly to the flat interior panel, and the 30 inch length suits standard 24 inch deep base cabinets with a full-depth box. Shops building frameless handle-less kitchens, designers specifying a contemporary run without hardware, and contractors installing modern European-style cabinetry will all find it a straightforward match. For face-frame cabinets, a face-frame version of the F70 line is the correct choice — this frameless model does not include rear mounting brackets and is not configured for frame-inset installation.
No. This is a pure push-to-open model — the drawer opens with a press and closes without a damper. For damped, quiet closing, choose the soft-close version of the F70 instead.
Confirm the sold-as unit on the product page before ordering; standard practice in this line is to sell as a pair. One pair installs one drawer.
The box must be built to Salice's specification for the F70 series — correct nominal length, box width, side thickness in the 1/2 to 3/4 inch range, bottom recess, and rear notch for the fixing clips. An off-spec box will not seat properly.
Salice F70 fixing clips are series-specific and may be sold separately. Confirm what ships with this SKU before placing your order to avoid a second shipment.
The mechanism requires a small gap between the drawer front and the cabinet face to travel through its stroke. An inset-tight front will prevent the trigger from firing — follow Salice's published gap spec for the F70 series.
Match the 30 inch length to your cabinet depth, build the box to Salice's spec, and order one pair per drawer — the rest is a press of the front.
Sold In: 1 Set
