Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Salice F70 is a 21 inch, full-extension undermount drawer slide with mechanical push-to-open, built for face-frame and frameless cabinets that use handle-less drawer fronts. At 170 lb per pair, it carries loads well beyond the standard undermount range while staying fully hidden beneath the drawer box.
Push-to-open suits any drawer front where a pull or knob would interrupt a clean, unbroken surface — slab fronts, integrated panel fronts, or high-gloss lacquer work where hardware would show. The F70's 170 lb rating makes it practical beyond standard kitchen drawers: heavy utensil pulls, pantry base drawers carrying canned goods, and waste-bin pull-outs where a touch-open interface keeps hands free. In a face-frame cabinet, the rear mounting brackets (sold separately, F70-series specific) support the slide's back end behind the frame — a step that must not be skipped. In frameless construction, the slide mounts directly to the cabinet side panel.
This is a mechanical push-to-open slide only. It closes without damping, so the drawer settles by momentum rather than by a soft-close damper. If a quiet, damped close is the priority for this application, choose a soft-close model from the F70 line instead of this one.
The F70 is made from steel with a zinc finish — a functional, corrosion-resistant coating suited to indoor cabinetry. Because the slide runs concealed beneath the drawer box, the finish serves durability rather than appearance. The roller-bearing carriage delivers a smooth, even pull across the full 21 inch travel, and the full-extension geometry means rear-of-drawer contents are within reach at every opening. Build the drawer box to Salice's published specification for the F70 series: nominal 21 inch length, correct box width, bottom recess, rear notch, and the drilling pattern for F70 fixing clips. Salice fixing clips are series-specific and do not interchange with clips from other undermount brands or lines.
Cabinet shops running production on handle-less face-frame or frameless kitchens will recognize this as a purpose-built tool — not a standard undermount pressed into a touch-open application, but a slide engineered from the start for that role. At 170 lb per pair, it also draws from designers and contractors who need concealed slides under oversized or unusually heavy drawers where a standard-capacity undermount would be undersized. Homeowners renovating a kitchen with slab fronts and no surface hardware will find the touch-open behavior intuitive and durable over time.
No. This is the push-to-open version of the F70 — it opens with a press and closes by momentum, without a damper. The two functions are separate models in the F70 line; choose the soft-close model if a damped close is needed.
Face-frame cabinets require rear mounting brackets to support the back end of the slide behind the frame. The brackets are F70-series specific and sold separately — do not substitute rear brackets from other brands or slide families.
Per pair, which is the standard basis for undermount load ratings throughout this catalog. One pair carries one drawer.
Only if the box is built to Salice's F70 specification: 21 inch nominal length, correct width for the series, bottom recess, rear notch, and the fixing-clip drilling pattern. An off-spec box will not seat correctly on the slides.
The front must clear the cabinet face enough for the mechanism to travel and return. Salice's installation specification for the F70 push-to-open version gives the required gap — consult that document before fitting the front.
When the design calls for no hardware on the front and the drawer carries real weight, the F70 push-to-open in the 21 inch length is a direct answer — full extension, 170 lb capacity, and touch-open behavior in one concealed slide rated for the job.
Sold In: 1 Set
