Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Salice F70 27 inch push-to-open undermount is a full-extension concealed runner built for frameless casework and handle-less fronts. A light press on the drawer face ejects it completely, and the slide carries up to 170 lb per pair — well above the 90 to 110 lb range of standard kitchen undermounts.
A 27 inch slide suits deep base cabinet drawers — the kind that store large pots, bulk pantry goods, or double-tiered utensil trays. At full extension, the whole box clears the face frame so nothing stays buried at the back. The 170 lb capacity rating means the slide handles these loads without strain: a full-depth pots-and-pans drawer, a heavily stocked spice pull-out, or an oversized file drawer all fall well within the working range. The push-to-open trigger is especially practical in a deep drawer, where reaching past a full load to grip a small pull is awkward — a press on the front face does the same job cleanly.
The F70 runs on steel members with a zinc finish, the standard protective coating for concealed slides that spend their working life hidden beneath the drawer box. Because the slide is out of sight when the drawer is closed, the finish is functional rather than decorative — it protects the steel through the humidity and temperature cycles of a kitchen environment. The side-thickness range of 1/2 to 3/4 inch gives shops flexibility to run dovetailed plywood boxes or solid-wood sides through the same slide specification, without switching to a different model mid-run.
Cabinet shops building handle-less modern kitchens in frameless construction are the primary audience. The 27 inch length is a production staple for 24 to 27 inch deep base cabinets, and the 170 lb rating covers applications that standard 90 to 100 lb undermounts cannot. Interior designers specifying pull-free hardware zones and contractors outfitting accessible kitchens — where reaching for a pull is a barrier — will also find the push-to-open mechanism a practical fit. This is the mechanical push-to-open version of the F70: the drawer closes without damping. If a damped, silent close is the priority, a soft-close model is the right choice for that application instead.
No. This is the push-to-open model — it opens with a press on the front and closes without a damper. It does not combine push-to-open with soft-close. If damped closing is required, choose the soft-close version of the line for that installation.
This SKU is the frameless version, designed to mount directly to the cabinet side panel. For face-frame construction, a face-frame-configured version with the appropriate rear mounting support is the correct choice.
The drawer box must be built to Salice's published specification for the F70 series at the 27 inch nominal length — including the correct box width, bottom recess, rear notch, and drilling for the Salice series-specific locking clips. A standard unmodified box will not seat correctly on an undermount slide.
Per pair, as load ratings are stated throughout the undermount category. One pair of F70 slides carries up to 170 lb — the full weight of the drawer box and its contents combined.
Salice F70 locking clips are series-specific and should be confirmed at the time of order. They do not interchange with other undermount brands or series.
Confirm your drawer box is built to the Salice F70 specification at the 27 inch nominal length, verify frameless cabinet construction, and add this slide to your order — one pair per drawer.
Sold In: 1 Set
