Bainbridge Recessed Pull 2-7/8" (73 mm) Center to Center, Black, 1710BK-32

Bainbridge Manufacturing Recessed Pull For Clean Grips

Bainbridge Manufacturing recessed pull gives you a low-profile grip solution using a 2-7/8 in (73 mm) center to center layout, so hole spacing aligns to a precise standard when you drill or route for this handle. The plastic construction creates a lightweight pull that is straightforward to mortise into cabinetry or panels. A black finish defines the pull visually, allowing it to read clearly against lighter materials or blend into dark surfaces as the job requires. The pull measures 3-5/8 in long, which helps it span a modest opening while keeping overall hardware size contained for tight layouts. A 1 in projection provides usable finger clearance from the mounting surface, giving hands room to operate without the hardware standing far off the face. With a 1-1/2 in width, the pull offers a stable gripping area while staying narrow enough for slim frames or rails.

Key Pull Details That Support Cabinet Work

• The 2-7/8 in (73 mm) center to center spacing sets consistent screw locations, which simplifies layout when repeating this pull across multiple doors or drawers.
• The 3-5/8 in overall length keeps the pull compact, helping it fit shorter drawer fronts or narrow cabinet faces without crowding other hardware.
• The 1 in projection defines how far the pull stands off the surface, giving enough clearance for fingers while reducing snag points in walkways or work areas.
• The 1-1/2 in width creates a comfortable gripping span, supporting a firm pull on doors or drawers without taking excessive rail space.
• The black finish establishes a uniform appearance, helping hardware lines stay consistent across a run of cabinets or fixtures.
• The plastic material keeps each pull lightweight, which can ease handling during installation on large-volume jobs.

Recessed Pull Fit, Mortise Size, And Mounting Details

This Bainbridge Manufacturing 1710 Series pull uses a recessed style, so it nests into a cutout instead of sitting fully on the surface, which supports a flatter profile on doors and drawers. The mortise hole dimension of 3-1/8 in defines the opening length you cut, guiding router templates or jig stops for accurate fit. With a 2-7/8 in center to center measurement, screw holes sit inside that mortise span, aligning fasteners within the recessed pocket. The 1-1/2 in width and 1 in projection together describe the cavity depth and face coverage, which assists when you coordinate pull placement with panel thickness and edge reveals. The #6 sheet metal screw size listed for this pull clarifies the intended fastener diameter, helping match drill sizes to the mounting points on your panels or cabinet fronts.

Using The 1710BK-32 Pull In Cabinet Projects

Where This Bainbridge 1710 Series Pull Works Best

The Bainbridge Manufacturing 1710BK-32 recessed pull fits projects that call for a compact handle with controlled spacing, because its 2-7/8 in center to center pattern delivers a defined mounting layout. The 3-5/8 in length allows it to sit comfortably on mid-size cabinet doors, drawer fronts, or access panels where a longer pull might interfere with edges or adjacent hardware. A 1-1/2 in width keeps the footprint narrow, which supports use on slender stiles, mullions, or utility panels without overwhelming the face. With a 1 in projection, this pull offers enough depth for fingers to grab inside the recess while keeping a low snag profile in high-traffic aisles or shop environments. The black plastic construction suits installations where a non-metallic, visually uniform pull helps differentiate specific cabinets or integrates with black fixtures and trim.

Dimensions That Support Repeatable Install Results

The 2-7/8 in (73 mm) center to center dimension on this Bainbridge recessed pull anchors your drilling pattern, making it practical to set up drilling jigs that hit the same screw locations across multiple fronts. The 3-1/8 in mortise hole length gives a clear router or saw target, so the recessed pocket lines up with the pull body and maintains a neat perimeter. Matching the 3-5/8 in overall length to that mortise dimension leaves a small border, which frames the recess visually and helps hide small edge variations in the cutout. The 1-1/2 in width combines with the mortise to define the interior cavity, guiding how far you can position the pull from door edges or centerlines. A 1 in projection keeps the grip zone consistent, so doors and drawers feel similar in hand wherever you repeat this 1710 Series pull in a run.

Common Questions About This Recessed Pull

Select This Pull For Defined Spacing And Low Profile

The Bainbridge Manufacturing 2-7/8 in center to center black recessed pull 1710BK-32 offers a compact handle with clearly defined dimensions: 3-5/8 in length, 1-1/2 in width, 1 in projection, and a 3-1/8 in mortise hole. These measurements support consistent drilling, routing, and layout when you repeat this pull across cabinets or panels. For projects needing a black plastic recessed pull with precise center spacing and a modest footprint, this 1710 Series model from Wurth Baer Supply aligns well with controlled, repeatable hardware installs.