Bainbridge Manufacturing 2-7/8" (73 mm) Center to Center Putty Recessed Pull - 1710PT-32

Bainbridge 1710PT-32 Recessed Pull For Cabinets

Bainbridge 1710PT-32 recessed pull is a plastic handle from the Bainbridge Manufacturing 1710 Series that sits in a mortised opening, giving a streamlined grip where a low profile matters. The 2-7/8 in (73 mm) center to center layout positions mounting holes for consistent alignment across doors or drawers, which helps keep rows of hardware visually straight. The putty finish provides a neutral tone that blends with many casework colors, useful when the pull should perform without drawing attention. The 3-5/8 in overall length defines how much linear space the pull occupies on the edge or face, which helps when laying out tight installations. A 1 in projection sets how far the grip stands proud of the surface at its deepest point, balancing finger clearance with a compact feel.

Key Putty Recessed Pull Details For Projects

• The 1710 Series designation identifies this pull within Bainbridge Manufacturing offerings, which helps match it to other pieces in the same family when a uniform look is needed across a job.
• The plastic material construction keeps the pull light, which can be helpful on thinner cabinet components where a compact, recess-mounted pull is preferred over heavier metal options.
• The putty finish defines the color tone, which supports use on casework where a subtle, matching pull is desired rather than a high-contrast accent.
• The 2-7/8 in (73 mm) center to center dimension sets the screw spacing, which matters when drilling or machining repeatable hole patterns for multiple doors and drawers.
• The mortise hole size of 3-1/8 in controls the cutout needed in the panel, which helps plan routing or machining operations for a snug, accurate recessed fit.

Recessed Pull Fit, Mortise Size, And Layout

The mortise hole at 3-1/8 in length defines the opening that must be cut so the putty recessed pull seats properly, which helps the flange sit flush to the surface. With an overall length of 3-5/8 in, the pull extends slightly beyond the mortise, which provides a visible border to cover the cut edges. The 1-1/2 in width establishes the cross-grain or vertical footprint, which matters when working within narrow rails or stile dimensions. A 1 in projection indicates the maximum depth from the cabinet face to the outermost point of the pull, helping balance clearance with a compact profile. The 2-7/8 in (73 mm) center to center spacing fixes the fastener distance, which supports straight, repeatable mounting across casework runs.

Using This Plastic Recessed Pull In Workflows

Where This Putty Recessed Pull Fits Best

This Bainbridge Manufacturing putty recessed pull is part of the 1710 Series, placing it within a consistent product class for decorative hardware and moldings on cabinets or similar casework. The plastic material suits applications where a lighter handle is preferred, such as on smaller cabinet doors or drawer fronts that benefit from a recessed grip rather than a projecting bar. The 3-5/8 in overall length and 1-1/2 in width help it fit on moderate-size fronts without overcrowding the panel surface, which can be useful when working between hinge cups, edges, or other hardware. The 2-7/8 in (73 mm) center to center dimension also aligns with common drilling patterns for handles and pulls, so it can integrate into layouts that follow that spacing.

Details That Support Repeatable, Clean Installations

The mortise hole requirement of 3-1/8 in establishes a clear routing or drilling dimension, which simplifies jig design or CNC programming when multiple pulls are installed on a project. With a 1 in projection, the recessed pull delivers defined finger clearance while still staying relatively low to the surface, which helps reduce snag points in tight spaces. The 1-1/2 in width gives enough face area for the flange to cover the mortise edges, supporting a cleaner finished appearance after machining. The plastic construction pairs with the recessed style to keep the hardware profile compact, which can matter in installations where protruding handles might interfere with adjacent components. As part of the 1710 Series from Bainbridge Manufacturing, this pull can be selected to align visually with other pieces identified in that same series description.

Common Questions About This Bainbridge Recessed Pull

Select This Putty Recessed Pull For Your Next Run

The Bainbridge 1710PT-32 recessed pull combines a 2-7/8 in (73 mm) center to center layout, a 3-1/8 in mortise hole, and a 3-5/8 in overall length to support consistent cabinet hardware runs. The plastic construction with a putty finish offers a light, neutral option when a recessed grip is preferred. For cabinet and casework projects that call for this specific 1710 Series geometry and color, this pull from Wurth Baer Supply aligns with defined dimensions so layouts and machining can be planned around known measurements.