Kinetron Pendaflex Hanging Rail Bracket 5/8", Zinc, KHFB-625-ZC

Pendaflex 5/8 Top Fastening Bracket Use

Pendaflex 5/8 top fastening bracket from Kinetron Corporation is a file drawer component that mounts a 1/8 inch thick file rail on a drawer box. This bracket is constructed of 16 gauge steel, so the rail support is built around a substantial metal section that holds its shape under typical file drawer loads. The design is intended for file drawer construction where a dependable connection between file rail and drawer box side is required.

The bracket is designed to affix a 1/8 inch thick file rail, which sets a clear match between the bracket channel and the hanger rail stock. It fastens to the top of the drawer box side and then fastens via screw to the outside of the drawer box, so the rail location is set by the drawer box thickness and the top edge reference. The zinc finish on this bracket provides a uniform metal surface that is appropriate for cabinet and drawer interiors in woodworking environments.

File Drawer Bracket Details That Drive Value

• The bracket is constructed of 16 gauge steel, providing a rigid support for the 1/8 inch thick file rail so the rail position stays consistent along the drawer length during normal use.
• It is designed to affix 1/8 inch thick file rail, which aligns the bracket profile to standard Pendaflex hanger rail stock and simplifies layout when planning file drawer construction.
• The bracket mounts to the top of the drawer box side, giving a clear reference edge for positioning the file system and helping maintain consistent file height from drawer to drawer.
• Fastening is via screw to the outside of the drawer box, so installers work from the exterior face of the side, which can streamline production setups on drawer assemblies.
• Pendaflex brackets are offered in three drawer box thicknesses, and this version is identified as 5/8, helping match the bracket to the drawer side thickness used in a specific project.
• The zinc finish provides a metallic appearance that coordinates with typical drawer hardware while offering a surface suited to interior cabinet environments.

Drawer Box Side Mounting And Fastening

This Pendaflex bracket is designed to affix to the top of the drawer box side, establishing the rail line directly off the side panel edge for file drawer layouts. After seating on the top of the drawer box side, the bracket fastens via screw to the outside of the drawer box, allowing access from the exterior face during assembly. The 5/8 designation aligns with one of the three drawer box thickness options mentioned for Pendaflex brackets, so it is intended for drawer sides built around that thickness range. Because the bracket is built of 16 gauge steel, the mounting interface resists deformation during installation, which helps keep the file rail straight once the hanger rail is installed.

Using This Pendaflex Bracket In File Drawers

Where This File Drawer Bracket Fits Best

This Pendaflex 5/8 top fastening bracket is a file drawer component used in drawer construction systems that rely on hanging file rails. It is part of the Drawer Box Accessories category, fitting into file drawer projects where a 1/8 inch thick file rail is required. The bracket affixes to the top of the drawer box side, so it suits drawer box constructions that leave the top edge accessible for hardware. Because the bracket fastens via screw to the outside of the drawer box, it integrates into workflows where drawer sides can be handled from the exterior, such as in shop assembly lines or bench setups. The bracket works in combination with Pendaflex hanger rail that is constructed of 1/8 inch thick aluminum flat stock.

Pendaflex hanger rail compatible with this bracket is constructed of 1/8 inch thick aluminum flat stock and is offered in Plain Aluminum and Black finishes, so the rail appearance can be selected to complement the interior look of the file drawer. That rail is available in two heights, 1/2 inch and 3/4 inch, allowing file rail height to be set within those options while still working with the same 1/8 inch thick bracket interface. The hanger rail length of 72 inches provides stock that can be cut down for multiple drawers, and that length lets installers standardize on a single aluminum section when building runs of file drawers.

Details That Support Repeatable File Drawer Results

The Pendaflex 5/8 top fastening bracket uses a defined 1/8 inch rail thickness, which supports repeatable results when pairing with Pendaflex hanger rail constructed from 1/8 inch thick aluminum flat stock. Because the bracket is constructed of 16 gauge steel, the bracket shape maintains a stable seating surface for the aluminum rail, so the rail elevation relative to the drawer side remains consistent as drawers are produced. Mounting to the top of the drawer box side gives installers a straightforward reference line for file rail placement, supporting uniform file suspension height across multiple cabinets.

Fastening via screw to the outside of the drawer box locates the structural connection on the exterior face, which can be helpful when setting up jigs or stops for repetitive fastening operations along production runs. The zinc finish on the bracket offers a neutral metallic surface that visually coordinates with the Plain Aluminum and Black finishes available on the 1/8 inch thick hanger rail. With Pendaflex brackets offered in three drawer box thicknesses and this version identified for 5/8 drawer box sides, the part number KHFB-625-ZC provides a specific reference for selecting a bracket that matches that drawer side thickness in file drawer construction.

Common Questions About Pendaflex Drawer Bracket

Selecting This Bracket For File Drawer Builds

The Pendaflex 5/8 top fastening bracket from Kinetron Corporation gives file drawer builders a 16 gauge steel support designed around a 1/8 inch thick file rail. With mounting that affixes to the top of the drawer box side and fastens via screw to the outside of the drawer box, it integrates into drawer construction systems that use 5/8 drawer sides. For file drawer projects that use Pendaflex hanger rail constructed of 1/8 inch thick aluminum flat stock, this KHFB-625-ZC bracket provides a clearly defined component for setting up consistent hanging file layouts.