Kinetron Pendaflex Hanging Rail Bracket 1/2", Black, KHFB-500-BL

Pendaflex Bracket 1/2 Top Fastening Use

Pendaflex bracket 1/2 top fastening describes a Kinetron Corporation file drawer component built as a 1/2 inch top fastening bracket for hanging file systems. The bracket is part of the Pendeflex bracket line, so it works as the connection point between the drawer box side and a matching Pendeflex hanger rail. Its construction from 16 gauge steel gives the bracket a robust body that supports the 1/8 inch thick file rail during daily drawer operation. The design to affix to the top of the drawer box side positions the rail at the correct elevation for file folders, which helps keep the files aligned as the drawer opens and closes. Fastening via screw to the outside of the drawer box creates a solid, repeatable mounting method that suits production drawer construction workflows.

Key Pendaflex Bracket Details For Projects

• The Pendeflex brackets are constructed of 16 gauge steel, which gives each bracket a sturdy profile so the 1/8 inch thick file rail remains supported under the weight of hanging files over time.
• The bracket is designed to affix a 1/8 inch thick file rail, so the mating rail dimension is predetermined, simplifying layout when planning file drawer components that use this system.
• The bracket is designed to affix to the top of the drawer box side, setting the hanger rail location relative to the drawer height and creating a consistent reference when building multiple drawers in a bank.
• The bracket is designed to fasten via screw to the outside of the drawer box, so installers can access the connection from the exterior of the drawer box side during assembly and adjustment.
• The Pendeflex brackets come in three finishes and three drawer box thicknesses, which lets shops standardize on a system while matching different drawer side constructions within the same project.
• The Pendeflex hanger rail is constructed of 1/8 inch thick aluminum flat stock, so when paired with the bracket, the steel and aluminum elements create a defined interface for hanging file support.

Bracket And Hanger Rail Installation Function

This Pendaflex 1/2 inch top fastening bracket is designed to affix to the top of the drawer box side, so installers locate the bracket along the upper edge where the hanging files need to run. The fastening via screw to the outside of the drawer box side means the attachment points are accessible from the exterior, which supports efficient assembly on production benches. The bracket is designed to affix a 1/8 inch thick Pendeflex hanger rail, so once the bracket line is established along the drawer sides, the aluminum rail seats into a consistent channel. With the hanger rail available in 1/2 inch and 3/4 inch heights, the installed bracket-and-rail combination can match the specified folder clearance within the file drawer construction system.

Using This File Drawer Component In Builds

Where This Pendaflex Bracket Is Applied

This Pendaflex 1/2 inch top fastening bracket functions within drawer construction systems as part of the file drawer components category. It is designed to affix a 1/8 inch thick file rail, so it directly interfaces with the Pendeflex hanger rail constructed of 1/8 inch thick aluminum flat stock. Because the bracket is designed to affix to the top of the drawer box side, it ties the hanging file system to the drawer box accessories layer, sitting just above the interior cavity where files will hang. The bracket fastens via screw to the outside of the drawer box, so its working plane is defined by the drawer side thickness option selected from the three drawer box thicknesses offered in the Pendeflex bracket range. With the hanger rail available in plain aluminum and black finishes and in 1/2 inch and 3/4 inch heights, this bracket supports layouts where color and rail height coordinate with the wider cabinet hardware design.

Why The Verified Details Matter On The Job

The construction of the Pendeflex bracket from 16 gauge steel provides a rigid support for the attached 1/8 inch thick file rail, which helps the hanging file path stay straight across the drawer span. The top-of-drawer-side affixing method sets the reference height using the actual drawer box construction, important when building multiple file drawers to a common line. Fastening via screw to the outside of the drawer box side uses a direct mechanical connection, which contributes to repeatable positioning when drawers are assembled in batches. The availability of three finishes and three drawer box thicknesses within the Pendeflex bracket line allows shops to match bracket selection to specific drawer builds while still using the same 1/8 inch thick aluminum flat stock hanger rail format. The hanger rail height choices of 1/2 inch and 3/4 inch create defined options for how high the rail edge sits above the drawer side, giving designers and builders a consistent basis when detailing file drawer components.

Common Questions About This Pendaflex Bracket

Selecting This Bracket For File Drawer Builds

The Pendaflex 1/2 inch top fastening bracket in black gives builders a defined way to mount a 1/8 inch thick Pendeflex hanger rail to the top of a drawer box side. Its 16 gauge steel construction, screw-fastened outside mounting, and alignment with 1/8 inch thick aluminum hanger rails turn it into a predictable file drawer component for drawer construction systems. When a project calls for file drawer components from the Pendeflex family, this bracket offers a focused option for tying the rail position directly to the drawer box accessories layer.