Kinetron Pendaflex Hanging Rail Bracket 3/4", Zinc, KHFB-750-ZC

Pendaflex 3/4 Top Fastening Bracket For File Drawers

Pendaflex 3/4 top fastening bracket gives you a dedicated way to support a 1/8 inch thick file rail at the top of a drawer box side, so you can build file storage into a standard drawer box layout. The bracket is part of the Pendeflex file drawer component line from Kinetron Corporation, so it ties directly into a proven hanging file system. Its 3/4 reference matches one of the hanger rail height options in the Pendeflex system, which helps you plan consistent file rail elevation across a run of drawers. The bracket design fastens to the outside of the drawer box, so the file rail position is controlled by the bracket rather than the side thickness alone. That approach lets you repeat the same file setup from drawer to drawer in a cabinet bank.

Key Pendaflex Bracket Details For File Setup

• The bracket is constructed of 16 gauge steel, which provides a rigid support point for the 1/8 inch thick file rail so it can carry the hanging file load without distorting the drawer side.
• It is designed to affix a 1/8 inch thick file rail, so the rail and bracket interface is defined and you can size and cut Pendeflex hanger rail stock with confidence for consistent file fit.
• The bracket is designed to mount to the top of the drawer box side, which sets the hanging file rail right where file folders expect to sit and keeps the active components above the drawer floor.
• Fastening is via screw through the bracket into the outside of the drawer box, which locks the bracket location in place and resists shifting during years of drawer cycling in service.
• These Pendeflex brackets are offered for three drawer box thicknesses in the system, which lets you match the bracket choice to your side material and hold the file rail at a repeatable height.

Installation Details For Top-Mounted File Rail Bracket

The Pendaflex 3/4 top fastening bracket is designed to sit along the top edge of the drawer box side, placing the 1/8 inch thick file rail at the correct elevation for the Pendeflex hanging file layout. Because the bracket fastens via screw to the outside of the drawer box, you work from the exterior face, which keeps the interior face clear for the file rail and hanging files. The bracket works within a system where hanger rails are constructed from 1/8 inch thick aluminum flat stock, so the contact between steel bracket and aluminum rail is positive and defined. This arrangement lets you cut 72 inch rail stock to drawer width and locate it on a solid bracket seat at each end.

Using This File Drawer Component In Projects

Where The Pendaflex Bracket Fits In Drawer Builds

This Pendaflex 3/4 top fastening bracket sits at the top of the drawer box side and acts as the interface between the drawer box and the 1/8 inch thick Pendeflex hanger rail. In a file drawer build using the Pendeflex system, the drawer box side thickness is supported by a dedicated bracket version while the hanger rail height is defined by options such as 1/2 inch or 3/4 inch rail. The bracket is part of a broader file drawer component family within drawer construction systems and drawer box accessories, so it is intended to integrate directly into new file drawer construction or into drawer box conversions designed around Pendeflex hanger rail stock. When planning a run of file drawers, the presence of a labeled manufacturer part number, KHFB-750-ZC, ties this bracket to a known configuration within the Kinetron Corporation offering and supports repeat ordering on future jobs.

Why These Bracket Details Support Consistent Results

The 16 gauge steel construction of the Pendaflex 3/4 top fastening bracket provides strength and stiffness where the 1/8 inch thick aluminum hanger rail meets the drawer box side, which helps the hanging files track in line across the width of the drawer. Mounting at the top of the drawer box side places the Pendeflex rail in a defined vertical position, so matching rails in two finishes - plain aluminum or black - can sit at the same level from drawer to drawer. Rail stock is supplied in 72 inch lengths, so a single length can be cut down to several drawer widths and each piece can bear on a pair of these brackets for support. The fact that Pendeflex brackets are offered in three drawer box thicknesses within the system means the same hanging file geometry can be maintained while changing side material, which simplifies standardization of file drawer interiors across different cabinet lines.

Common Questions About This Pendaflex Bracket

Select This Pendaflex Bracket For File Drawer Work

The Pendaflex 3/4 top fastening bracket from Kinetron Corporation gives you a defined way to mount 1/8 inch thick Pendeflex hanger rail at the top of a drawer box side. With 16 gauge steel construction, a screw-fastened outside mounting pattern, and integration into a system that offers multiple drawer box thickness options and hanger rail heights, it supports repeatable file drawer layouts across cabinet runs. For projects built around Pendeflex file drawer components and 1/8 inch aluminum hanger rail, this bracket serves as the core structural link between the drawer box and the hanging file rail.