Patwin Plastics 125 Dove Gray Tee Molding, 250 ft L x 13/16" W - 7/64" Kerf - P500-13/16-125

Dove Gray T-Moulding For Clean Edge Transitions

Dove Gray T-Moulding from Patwin Plastics, Inc. is a non-toxic polyethylene tee molding designed to finish and protect edges in a consistent dove gray color. The 13/16 inch width covers common panel edges, so installers can bridge transitions cleanly across worktops, cabinetry, or fixtures that match this width. A 7/64 inch kerf interface lets the stem lock into a matching saw cut, giving the molding a defined bite in the substrate. The Flexene molding construction is engineered to fit any contour, whether outside or inside curves and radii, so one profile can handle straight runs and bends on the same job. Product dimensions, workability, and color are described as consistently precise, which helps fabricators cut kerfs, heat-form, and layout material with predictable results from roll to roll. The dove gray tone aligns with the SAP description "T-MOULDING, DOVE GRAY," supporting neutral, commercial-ready installations.

Key Tee Molding Details That Help On Site

• Non-toxic polyethylene construction provides an edge treatment material suited to woodworking environments where installers value a polymer that works cleanly with shop tooling and typical handling.
• Flexene molding design fits any contour, including outside and inside curves and radii, so one molding profile can run around corners, arched sections, or serpentine layouts without changing product.
• Consistently precise dimensions, workability, and color help installers cut a matching 7/64 inch kerf, feed the 13/16 inch width, and sequence multiple rolls while expecting the same fit and appearance.
• A design that insures the installation will fit firmly and hug edges permanently supports long-term edge retention, reducing call-backs for lifting or gaps along high-contact edges.
• Dove gray color, identified in both the product name and SAP description, offers a neutral tone that coordinates with many laminates and surfaces used in commercial millwork.

Installation Fit And Kerf Details For This T-Moulding

This Patwin Plastics 125 Dove Gray Tee Molding is 13/16 inch wide, so it is intended to cover edges sized for that face width in typical panel construction. The molding uses a 7/64 inch kerf, which means the groove cut in the substrate must match that thickness to grip the stem properly. Because the product is manufactured from non-toxic polyethylene, installers are working with a plastic that responds predictably to standard cutting and forming operations used on similar polymers. The Flexene design fits any contour, allowing the same kerf and width setup to carry through straight sections, inside curves, and outside radii without changing tooling dimensions. A design that insures the installation will fit firmly and hug edges permanently supports tight engagement in the 7/64 inch kerf, which matters wherever edges see regular contact.

How This Dove Gray Tee Molding Performs In Use

Where This 13/16 Inch Tee Molding Is Applied

As a tee molding in the Edgebanding & Surfacing category, this Patwin Plastics P500-13/16-125 profile is used wherever an exposed panel edge benefits from a polyethylene cap. The 13/16 inch width covers the edge face while the 7/64 inch kerf stem anchors into the panel, creating a T-shaped engagement. Because the Flexene molding fits any contour, it can follow outside corners on countertops, inside radii on fixtures, or flowing curves on custom millwork without switching profiles. Non-toxic polyethylene construction supports use across woodworking environments that favor plastic trims over metal or raw laminate edges. The dove gray color keeps the finished edge visually tied to surfaces that call for a neutral gray accent or match, maintaining a consistent appearance across multiple panels on the same project.

Why Flexene Design And Precision Matter For Results

The Flexene molding design that fits any contour, whether outside or inside curves and radii, allows installers to form continuous runs with fewer joints, which reduces potential weak points at corners. Consistently precise dimensions, workability, and color mean the 13/16 inch width and 7/64 inch kerf interface behave predictably from one 250 foot roll to the next, supporting repeatable machine setups and uniform reveals. A design that insures the installation will fit firmly and hug edges permanently helps the stem stay seated in the kerf, which is important for edges exposed to regular handling in commercial or shop-built installations. The non-toxic polyethylene material contributes to predictable workability during cutting, grooving, and pressing operations, so fabricators can standardize processes. With the Manufacturer Part # P500-13/16-125 clearly defined, shops can reorder the same tee molding profile and expect the same field performance and appearance.

Common Questions About Patwin Dove Gray T-Moulding

Choose This Tee Molding For Matching Kerf And Color

The Patwin Plastics 125 Dove Gray Tee Molding, P500-13/16-125, combines a 13/16 inch width with a 7/64 inch kerf and non-toxic polyethylene construction for predictable edging work. Its Flexene design fits any contour, handling inside and outside curves and radii under the same setup. Consistently precise dimensions, workability, and color support repeatable machining and a uniform dove gray finish across projects. For jobs that call for a neutral gray tee molding with firm edge engagement, this profile from Wurth Baer Supply aligns with woodworking workflows that depend on accurate, stable trim materials.