Spoon Shaped Shelf Supports 1/4" Bore - Pro Value Series BA1206PB

Spoon Shaped Shelf Supports 1/4 Bore For Stable Shelving

Spoon shaped shelf supports 1/4 bore from the Pro Value Series are pin-style supports designed to fit 1/4 inch bore holes and provide a defined resting surface for shelving. The brass construction delivers a brass finish that matches projects using brass-toned hardware, which keeps the visual line of cabinets and shelving consistent. Each support has a 1/2 inch long shelf rest area, so more of the shelf edge sits on metal rather than hanging unsupported, which helps distribute weight across the support area. The rest area is 5/16 inch wide, giving a compact but substantial landing zone that suits typical cabinet shelf thicknesses. A 1/4 inch bore pin length of 5/16 inch seats the pin into the side panel while leaving the spoon-shaped rest fully exposed, which helps the shelf sit flat while the pin remains fully embedded.

Key Shelf Support Details For Daily Use

• The 1/4 inch bore design matches 1/4 inch drilling, so installers can use standard 1/4 inch cabinet line boring patterns to place these supports without changing tools or layouts during a run of cabinets.
• The 1/4 inch bore pin length of 5/16 inch gives the pin enough depth into the side panel to hold the load path within the panel face, which helps keep shelves seated securely under typical cabinet use.
• The spoon shaped shelf rest area measuring 1/2 inch long supports more of the shelf edge than a point contact, which helps reduce concentrated pressure at the bore line during loading.
• The 5/16 inch wide shelf rest area creates a compact bearing surface that fits common shelf overhangs, so the shelf front can align cleanly with cabinet faces while still landing fully on the support.
• The brass finish allows these supports to visually coordinate with brass hardware elements, which keeps interior cabinet details consistent when doors are open.

Installation And Fit For 1/4 Inch Bore Panels

These spoon shaped shelf supports are designed specifically for panels drilled with a 1/4 inch bore, which suits common cabinet line boring setups. The 1/4 inch bore pin length of 5/16 inch allows the pin to seat into the panel without projecting through, so the outside face of the panel remains clear. The 1/2 inch long, 5/16 inch wide shelf rest area positions the bearing surface away from the bore while keeping it tight to the cabinet side, which supports the shelf edge while preserving usable interior width. The brass finish works well where a brass-toned detail is desired inside cabinets or shelving units, maintaining continuity with other brass hardware choices in the same installation.

How These Brass Shelf Supports Work In Cabinets

Using Spoon Shaped Shelf Supports 1/4 Bore In Cabinets

As part of the Pro Value Series, the BA1206PB spoon shaped shelf supports are intended for use wherever 1/4 inch bore holes are drilled for adjustable shelves. The 1/4 inch bore size aligns with common cabinet line boring patterns, so these supports drop into predrilled holes in cabinet sides or uprights. Once installed in the panel, the 5/16 inch bore pin length embeds into the material while leaving the spoon-shaped rest exposed inside the cabinet, ready to carry the shelf. The 1/2 inch long rest extends under the shelf edge so the shelf bears on a metal surface over a short length rather than at a single point. Because the rest is 5/16 inch wide, it sits close to the side panel while still giving enough surface to carry typical cabinet shelf loads on properly constructed shelving. The brass finish helps these supports visually blend with brass-finished hinges or pulls when the cabinet interior is visible.

Why The BA1206PB Dimensions Support Repeatable Results

The defined 1/4 inch bore pin diameter and 5/16 inch pin length on the BA1206PB support create a predictable fit in correctly sized 1/4 inch holes, which supports consistent alignment from cabinet to cabinet. That fixed pin length helps the spoon rest sit at a repeatable height relative to the bore line, so shelves line up uniformly along a run of bored holes. The 1/2 inch long, 5/16 inch wide shelf rest area gives installers a known bearing surface that matches the pin position, which simplifies laying out shelf depths and clearances. Because the support is spoon shaped rather than straight, the load transfers from the shelf into the pin through a curved rest, helping the shelf settle into a consistent position across multiple supports. With the brass finish tied to the Pro Value Series identity, projects using brass-toned interior details can keep tooling, drilling, and hardware selection consistent from job to job.

Common Questions About BA1206PB Shelf Supports

Select BA1206PB Brass Supports For 1/4 Inch Bores

The BA1206PB spoon shaped shelf supports from the Pro Value Series combine a 1/4 inch bore pin with a 5/16 inch pin length, giving a defined fit in standard 1/4 inch bored panels. The 1/2 inch long, 5/16 inch wide shelf rest area carries the shelf edge on a predictable metal surface, useful when laying out adjustable shelving positions. With a brass finish suited to projects using brass-toned hardware, these supports align drilling patterns, appearance, and shelf bearing details in one part for repeatable cabinet and shelving work.