Spoon Shaped Shelf Supports For 5 mm Bore
Spoon Shaped Shelf Supports 5 mm Bore describe a Pro Value Series support whose pin is sized for a 5 mm bore, so it fits standard 5 mm shelf holes used in many cabinet layouts. The shelf rest area is 3/8 inch long and 5/16 inch wide, so each support offers a defined seating surface that carries the shelf edge along a predictable contact patch. The 5 mm bore pin length is 3/8 inch, so the pin reaches into the hole deeply enough to anchor the support while leaving the rest area exposed for the shelf. These supports are available in Brass, Black, and Nickel finishes, so installers can match visible hardware to different interior designs. The manufacturer part number IF711NP identifies this specific nickel finish 5 mm support within the Pro Value Series line for streamlined ordering and repeat jobs.
Key Shelf Support Details That Help Jobs Run Smoothly
- The 5 mm bore design targets cabinets drilled with 5 mm shelf holes, so supports sit snugly in the system many shops already run on their boring equipment.
- The 3/8 inch long shelf rest area offers a consistent bearing length under the shelf edge, helping distribute load along the contact surface.
- The 5/16 inch wide shelf rest area defines how far the support projects under the shelf, giving installers a known ledge dimension when planning shelf depth and positioning.
- The 5 mm bore pin length of 3/8 inch balances insertion depth and clearance, so the support engages the side panel without crowding the interior space more than necessary.
- Availability in Brass, Black, and Nickel finishes lets shops keep a consistent visual line across different cabinet programs while keeping the same basic support geometry.
Mounting Fit And Bore Details For Installation
The 5 mm bore pin on this Pro Value Series support is matched to cabinet panels drilled with 5 mm holes, so it drops into standard metric line-bore patterns without extra layout steps. With a 3/8 inch pin length, the support engages enough material in the side panel to hold position while leaving the spoon shaped rest exposed for the shelf edge. The 3/8 inch long by 5/16 inch wide rest area defines how the shelf bears on the support, so installers can anticipate where the contact occurs relative to the panel face. Because the same geometry carries across finishes, shops can move between Brass, Black, and Nickel versions without changing their drilling or layout process.
How These IF711NP Supports Work In Cabinet Runs
Use In 5 mm Drilled Cabinet And Closet Systems
This Pro Value Series shelf support is built around a 5 mm bore pin, so it integrates into cabinet, closet, and storage runs that already use 5 mm drilling patterns. The 5 mm bore pin length of 3/8 inch means the support penetrates the side panel to a known depth, which is helpful when matching hole depth across multiple panels in a run. Because the spoon shaped rest area is 3/8 inch long and 5/16 inch wide, every support presents the same footprint under the shelf edge, so rows of supports line up consistently from cabinet to cabinet. The Nickel finish on the IF711NP variant gives a neutral metallic look that suits many interior cabinet colors, while the same dimensional details are available in Brass and Black when different finishes are required on related projects. Using the same geometry across finishes keeps layout, boring patterns, and shelf sizing consistent from one job to the next.
Details That Support Repeatable Shelf Layouts And Service
The defined 3/8 inch by 5/16 inch shelf rest area gives shops a repeatable reference when they design shelf depths relative to the cabinet side, helping them keep clearances consistent along a whole line of cases. The 5 mm bore pin length of 3/8 inch sets a predictable engagement into the panel, which matters when installers rely on uniform hole depths during production boring. Since the support is part of the Pro Value Series, the IF711NP part number ties directly to the Nickel 5 mm bore version, simplifying reorders when shops standardize on this style. Availability in Brass, Black, and Nickel finishes around the same core geometry helps maintain a single drilling and shelf pattern while addressing different visual specifications. Together, the bore size, pin length, and spoon shaped rest define a repeatable support point that helps reduce layout variation on repeat installations.
Common Questions About These Pro Value Series Supports
What bore size do these spoon shaped supports fit?
These Pro Value Series spoon shaped shelf supports are designed for a 5 mm bore, so they fit cabinet and closet systems drilled with 5 mm shelf holes.
How large is the shelf rest area on the IF711NP support?
The IF711NP support has a shelf rest area 3/8 inch long and 5/16 inch wide, providing a defined bearing surface under the shelf edge.
What is the 5 mm bore pin length on this shelf support?
The 5 mm bore pin length is 3/8 inch, so the support engages the cabinet side panel to a known depth while leaving the rest area exposed.
Which finish does the IF711NP part number identify?
The IF711NP manufacturer part number identifies the Nickel finish version of this 5 mm bore Pro Value Series spoon shaped shelf support.
Are other finishes available with the same 5 mm bore design?
This 5 mm bore spoon shaped support is available in Brass, Black, and Nickel finishes, so different visual requirements can use the same basic geometry.
How does the Pro Value Series shelf support help standardize cabinet runs?
The Pro Value Series 5 mm bore support keeps the same pin length and rest dimensions across finishes, so drilling patterns and shelf layouts stay consistent.
Select IF711NP For 5 mm Bore Shelf Runs
The IF711NP Pro Value Series spoon shaped shelf support pairs a 5 mm bore pin with a 3/8 inch long, 5/16 inch wide rest area, giving cabinet shops a defined support geometry for 5 mm drilled systems. The 3/8 inch pin length sets a repeatable engagement into the panel, while the Nickel finish offers a clean look for many interior programs. With Brass, Black, and Nickel versions sharing the same basic dimensions, standardizing on this 5 mm bore support helps keep drilling patterns, shelf layout, and reordering centered on one proven configuration.
