Spoon Shaped Shelf Supports 1/4" Bore - Pro Value Series BA1206BN

Spoon Shaped Shelf Supports 1/4 Bore Use

Spoon shaped shelf supports 1/4 bore from the Pro Value Series provide a dedicated support point for cabinet shelving, so the shelf sits on a defined rest instead of bearing directly on the cabinet side. The 1/4 inch bore design sets these supports up for use in holes drilled to a consistent 1/4 inch diameter, which helps keep shelf pin rows uniform across a run of cabinetry. Each support has a spoon shaped rest, so the contact surface cradles the shelf edge rather than just touching at a point, helping distribute the load along the 1/2 inch long area. The nickel finish on these BA1206BN supports presents a neutral metallic look that blends with many interior hardware colors, so the supports sit visually in the background once the shelves are installed. Sold in full box quantities, these supports suit jobs where multiple cabinets need the same hardware.

Key Shelf Support Details For Cabinet Work

• The 1/4 inch bore on these spoon shaped supports matches a 1/4 inch drilled hole, which helps maintain tight, repeatable fit in standard cabinet shelf pin rows during layout.
• The shelf rest area is 1/2 inch long, giving the shelf edge a length of support so weight is carried along the metal rest instead of concentrating on a small point.
• The rest is 5/16 inch wide, which gives a defined bearing width under the shelf and helps keep the shelf from rocking side to side under normal loading.
• The 1/4 inch bore pin length of 5/16 inch sets how far the support seats into the panel, providing engagement inside the hole while keeping the spoon portion accessible for the shelf.
• The nickel finish option on these Pro Value Series supports offers a clean, metallic appearance that coordinates with common cabinet hardware finishes in many shop builds.

Practical Bore And Pin Details For Fit

The 1/4 inch bore specification on these spoon shaped supports defines the hole size needed in the cabinet panel, so drilling to that diameter sets up a consistent fit across all shelf locations. With a 1/4 inch bore pin length of 5/16 inch, each support extends into the panel enough to engage the material while still leaving the spoon rest fully exposed for the shelf edge. The 1/2 inch long shelf rest area gives each shelf more metal under its edge than a narrow-point support, which matters when setting up shelving meant to handle day-to-day use. At 5/16 inch wide, the rest surface keeps the shelf sitting on a stable platform rather than a thin lip, which helps reduce unwanted movement of the shelf in the cabinet once loaded.

How These BA1206BN Supports Serve Projects

Where Spoon Shaped Supports 1/4 Bore Are Used

These Pro Value Series spoon shaped shelf supports are part of the shelf, closet and garage organization hardware group, so they fit naturally into cabinet and storage builds that specify adjustable shelves. The 1/4 inch bore callout ties them to runs of evenly spaced holes in cabinet sides or uprights, giving woodworkers a defined hardware choice when 1/4 inch systems are already part of the design. Because each support has a 1/2 inch long and 5/16 inch wide shelf rest area, they work well anywhere a flat shelf edge needs to be carried along a small but clear ledge rather than a knife edge. The nickel finish version, designated by the BA1206BN part number and described as SHELFREST, NICKEL 1/4', integrates with cabinets that use nickel-tone hinges, pulls or other exposed metal parts in the same visual family.

Why These Dimensional Details Support Repeatable Results

The 1/4 inch bore and 5/16 inch pin length on this BA1206BN support work together to define both the drill size and engagement depth, which simplifies repeating the same setup across multiple cabinet boxes. When every hole is drilled to the 1/4 inch bore spec, each support seats to a consistent depth, so the spoon rests line up and keep shelves level from left to right. The 1/2 inch long shelf rest area gives the installer some forgiveness when positioning shelves, since the edge can sit anywhere along that 1/2 inch surface and still be fully supported. With the rest 5/16 inch wide, the contact patch between shelf and support helps the shelf resist small side loads common in everyday cabinet use. Identifying these as Pro Value Series BA1206BN shelf supports ties the job to a specific nickel finish model, which helps keep hardware selection uniform throughout a project that relies on matching supports.

Common BA1206BN Spoon Shelf Support Questions

Select BA1206BN Supports For 1/4 Inch Systems

The BA1206BN spoon shaped shelf supports combine a 1/4 inch bore fit, 5/16 inch pin length, and a 1/2 inch by 5/16 inch shelf rest area to support cabinet shelves on a defined metal ledge. With a nickel finish and Pro Value Series designation, they match projects that already specify 1/4 inch bore shelf pin layouts and nickel tone hardware. Sold in full box quantities only, they suit cabinet, closet and garage organization runs where the same support needs to repeat across multiple openings.