Round Wire Grommets For Clean Wire Pass-Throughs

Round Wire Grommets from Hughes Supply are plastic cover caps designed for a 1-3/4 inch bore hole, giving a finished edge where wires pass through shelves, closets, or multimedia work surfaces. The grommet cover cap works with a matching 1-3/4 inch diameter hole liner, so the liner protects the cut edge of the hole while the cap closes the opening to suit your wire layout. This gray cover cap is identified by manufacturer part number H-0785-9192/BG10, which ties directly to the 1-3/4 inch diameter hole liner it is designed to go with. Because the cap is sized for that specific bore hole, installers can drill a consistent opening and know the finished cover will seat properly, giving a uniform look across multiple locations.

Key Grommet Cover Details That Support Clean Installs

• The grommet cover cap is designed to go with a 1-3/4 inch diameter hole liner, allowing the liner to finish the bore while the cap closes the opening, which helps organize the wire exit point in cabinets and work surfaces.
• The cap and liner are sold separately, so installers can order only the quantity and mix of liners and cover caps needed for a given job, which supports flexible layouts where some holes stay open and others are capped.
• The product is part of a grommet line within multimedia and workspace components, aligning it with wire routing and management tasks in shelves, closets, and garage organization projects that require clean cable pass-through points.
• Box quantities of 10 and 100 are available, providing options for small runs or larger multi-station builds, which helps shops plan material usage on repetitive cabinet or workstation installations.
• The item is sold in full box quantities only, so ordering follows predictable counts, which simplifies estimating and stocking when the same 1-3/4 inch bore hole detail is used across multiple projects.

Grommet Cover Fit For 1-3/4 Inch Bore Holes

This Hughes Supply plastic cover cap is configured for a 1-3/4 inch bore hole, so one standard drill size handles every opening that will be finished with this cap. The cover cap is designed to go with a 1-3/4 inch diameter hole liner, meaning the liner and cap share the same hole preparation, which keeps layout straightforward on repetitive drilling patterns. By matching the cap to the liner, the edge of the bore hole is lined while the cap provides the visible finish, giving a consistent appearance wherever wires or cables exit storage or workspace areas.

Using This Hughes Supply Grommet In Real Projects

Where This 1-3/4 Inch Grommet Cover Works

This round plastic cover cap belongs to the grommets product class and sits in the multimedia and workspace components category, so it lines up naturally with projects that require cable pass-through points. In shelf, closet, and garage organization work, the 1-3/4 inch bore hole specification lets installers repeat the same hole size anywhere a wired device or power strip needs routing. Paired with the matching 1-3/4 inch diameter hole liner, the cap helps finish openings in cabinetry or worktops, creating a simple path for cords while maintaining a controlled opening size that matches the manufacturer part H-0785-9192/BG10.

Why The Separate Cap And Liner Help Workflow

The Hughes Supply design calls out that the grommet hole liner and grommet cover cap are sold separately, which allows different combinations on the same run of drilled holes. Installers can use the 1-3/4 inch diameter hole liner anywhere a raw bore edge needs a finished surface, then add the gray cover cap only where a closed or reduced opening is desired. Because box quantities of 10 and 100 are offered and sold in full box quantities only, shops can standardize on this H-0785-9192/BG10 cover cap for recurring layouts, then keep matching liners on hand as needed. This separation between liner and cover allows layouts to change over time while the original 1-3/4 inch bore hole remains usable.

Common Questions About This Gray Grommet Cover Cap

Select This 1-3/4 Inch Grommet Cap For Consistent Layouts

The Hughes Supply Round Wire Grommets plastic cover cap in gray is tied to a 1-3/4 inch bore hole and a matching 1-3/4 inch diameter hole liner, giving a clear drilling standard for your projects. With cap and liner sold separately and available in box quantities of 10 and 100, it supports both one-off workstations and repeated cabinet or shelf layouts. Use this H-0785-9192/BG10 cover cap wherever a 1-3/4 inch bore hole finish is required in multimedia, shelf, closet, or garage organization work.