Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Round wire grommets from Hughes Supply provide a plastic cover cap solution for finishing 1-3/4 inch bore holes in desktops, cabinets, and work surfaces. This specific cap is designed to work with a 1-3/4 inch diameter hole liner, so the cap and liner team together to dress the cutout edge and present a consistent finished opening. The no wire cut-out design keeps the cap surface closed, which helps hide the hole when wires are not routed through that location. The black color aligns with typical office and shop fixtures, so the finished opening blends with many standard worktops and multimedia components. As a member of the grommets product class under multimedia and workspace components, this cap suits professional woodworking, cabinet, and workspace buildouts where clean, repeatable hole terminations matter.
The grommet cover cap is designed to go with a 1-3/4 inch diameter hole liner, so the installation workflow centers on boring a 1-3/4 inch hole and matching that size with the specified liner. Once the hole liner is selected for that bore, this cap matches the liner interface, creating a consistent trim system around the opening. Because it is part of a round wire grommets system with a defined bore size, layout and drilling can be standardized across multiple work surfaces. The black color and plastic construction allow the finished hole to align with common furniture and cabinetry finishes, so routed areas read as intentional design elements rather than rough cutouts.
This product is categorized under shelf, closet, and garage organization as well as multimedia and workspace components, so it suits projects where wiring or service penetrations pass through shelving, cabinets, or bench tops. In a desk or multimedia station, the round wire grommet cap dresses a 1-3/4 inch bore hole so cable openings present as finished features instead of raw edged cuts. In closet or garage organization layouts, the cap works with the matching hole liner to standardize openings for power strips, chargers, or low-voltage leads routed through shelves. Because it belongs to the grommets product class, it fits into broader hardware layouts where multiple penetrations share the same 1-3/4 inch bore standard across a run of cabinetry or workstations.
The web description identifies this part as a grommet cover cap with no wire cut-out, which means the top surface stays fully closed when installed over the liner. That closed-face detail keeps unused 1-3/4 inch bore holes visually quiet in office or shop environments, so unused service locations do not show open pathways. When the cap is used in a multimedia or workspace component setting, the absence of a wire slot supports a clean appearance on tops that are pre-bored for future cabling expansion. Because the cap and liner are sold separately, the cap can be selected specifically for applications where a closed appearance at the opening is preferred over immediate cable pass-through. The plastic construction and black color indicated in the SAP description help the finished opening blend into many standard surface finishes, giving builders a predictable visual result across repeated installations.
The plastic cover cap is designed to go with a 1-3/4 inch diameter hole liner, so it matches 1-3/4 inch bore holes commonly drilled in work surfaces.
The no wire cut-out design keeps the cap surface closed, which hides the 1-3/4 inch bore hole when it is not being used for cable pass-through.
This cap is listed under multimedia and workspace components, so it supports cable or service openings in desks, counters, and similar workstations using 1-3/4 inch bore holes.
The description notes a grommet hole liner and cover cap sold separately, meaning this cap is intended to work in conjunction with a matching 1-3/4 inch hole liner.
The manufacturer part number is H-0782-9000/BG10, which identifies this specific Hughes Supply round wire grommet cover cap for future orders.
This item falls under the grommets product class, positioning it for use wherever finished 1-3/4 inch wire or service openings are needed.
The Hughes Supply round wire grommet plastic cover cap pairs with a 1-3/4 inch diameter hole liner to finish standard bore holes in worktops, shelving, and cabinets. The no wire cut-out configuration keeps those openings visually closed until needed, which suits multimedia and workspace layouts pre-drilled for future routing. With its role in the grommets category and a clear manufacturer part number H-0782-9000/BG10, this cap can be specified confidently wherever a black plastic trim solution is required around 1-3/4 inch bore holes.
Sold In: 10 Each
