
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Round wire grommets 1-3/4 bore from Hughes Supply give a finished cap for a 1-3/4 inch diameter hole liner, so cable pass-throughs in desks, cabinets, or workstations present a clean, consistent look. This plastic cover cap is part of a grommet system, which separates the cap from the hole liner, allowing installers to match the specific 1-3/4 inch liner and cap needed on a project. The white color aligns with the SAP description "COVERCAP, WHITE 1-3/4", helping the cap blend into light-colored furniture or built-ins where a discreet appearance is important. Being identified under Multimedia and Workspace Components signals its role in organizing wires in work areas, supporting tidy routing of power and data lines. The Hughes Supply branding and manufacturer part H-0785-11009/B10 give a traceable identifier, which matters when repeating the same detail across multiple jobs or specifying for shop drawings.
This grommet cover cap is designed to go with a 1-3/4 inch diameter hole liner, so the installation sequence centers on first fitting the liner in the bore hole, then applying the cap to complete the grommet detail. The separation of grommet hole liner and cover cap means each piece can be selected by diameter and appearance, which benefits installers standardizing a 1-3/4 inch wire opening across different furniture lines. As a plastic cover cap, it finishes the visible side of the grommet, helping the 1-3/4 inch bore present as a defined opening for wires rather than a raw drilled hole. Its identification as a grommet within Multimedia and Workspace Components underlines its job in managing cable transitions through panels and tops.
This Hughes Supply round wire grommet cover cap sits within Shelf, Closet & Garage Organization and Multimedia and Workspace Components, so it suits cabinetry, storage, and work surfaces where wires need to pass through a 1-3/4 inch bore. In a closet or garage organization run, the cap partners with a matching 1-3/4 inch hole liner to give a defined opening for power tools, chargers, or lighting leads, keeping the panel edge visually tidy. On desks or multimedia furniture, the white 1-3/4 inch grommet cap coordinates with light finishes, helping the cable pass-through read as part of the layout rather than a rough opening. Because the cap is designed to go with a 1-3/4 inch diameter hole liner, it fits situations where that specific bore size is already standard in shop processes or CNC programs.
The product data states that the grommet hole liner and grommet cover cap are sold separately, which allows the liner to handle direct contact with the bore hole while the plastic cover cap focuses on the finished face. This separation lets installers or shops keep consistent 1-3/4 inch liners in stock while choosing white caps where a light, clean look is desired. The note that packing uses box quantities of 10 and 100 supports repeatable production work, since the same H-0785-11009/B10 cover cap can be applied across multiple units without mixing batches. Identifying the part as a grommet cover cap designed for a 1-3/4 inch diameter hole liner helps planners lock in that bore size across drawings, templates, and cut lists, reducing variation from piece to piece. The classification under Grommets and Multimedia and Workspace Components clarifies its role as the visible finishing element in cable routing details.
The cover cap is designed to go with a 1-3/4 inch diameter hole liner, so it supports projects using a 1-3/4 inch bore for wire pass-throughs.
The grommet cover cap is identified by Hughes Supply manufacturer part H-0785-11009/B10, helping buyers specify and reorder the exact same 1-3/4 inch cap.
The SAP description "COVERCAP, WHITE 1-3/4" identifies the cover cap as white, which suits light-colored cabinets, furniture, or workspace surfaces.
The product data notes that the grommet hole liner and grommet cover cap are sold separately, with this cap designed to go with a 1-3/4 inch diameter liner.
The category placement under Shelf, Closet & Garage Organization and Multimedia and Workspace Components points to use in cabinetry, storage, and workspace cable routing.
The web description states box quantities of 10 and 100, and that the cap is sold in full box quantities only, fitting production and shop use.
The Hughes Supply plastic cover cap for 1-3/4 inch diameter hole liners gives a defined, white finished edge around wire openings in cabinets, closets, garages, and multimedia work areas. With the grommet hole liner and cover cap sold separately, this part focuses on completing the visible side of the 1-3/4 inch bore. Box quantities of 10 and 100, sold in full box quantities only, align this H-0785-11009/B10 cap with production runs where the same opening repeats. For projects built around a 1-3/4 inch wire grommet detail, this cover cap provides a consistent, cataloged solution.
Sold In: 10 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 100 Each | PGH403WH Mfr# H-0403-T-11009/C | Round Wire Grommets, 1-3/4" Bore Hole Grommet Hole Liners - Hughes Supply H-0403-T-11009/C | ||||
Sold in: 10 Each | PGH403WH-X Mfr# H-0403-11009/B10 | Round Wire Grommets, 1-3/4" Bore Hole Grommet Hole Liners - Hughes Supply H-0403-11009/B10 |