
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
1-3/4 inch bore grommet from Hughes Supply is a round wire grommet designed to finish a 1-3/4 inch bore hole in desks, cabinets, or workspace panels, so the cutout looks clean and controlled instead of rough. This Hughes Supply grommet functions as a grommet hole liner that protects the edge of the bore hole, which helps reduce wear at the opening where wires pass through. The web description specifies a 1-3/4 inch bore hole size, so installers can drill the correct opening and know the liner will seat into a consistent, predictable diameter. The SAP description confirms a white grommet, which creates a neutral, unobtrusive look that blends with many work surfaces. As part of the grommet product class in multimedia and workspace components, this part suits cable pass-through situations where a defined, repeatable hole size matters.
The web description defines the bore hole diameter as 1-3/4 inch, so a 1-3/4 inch drilling operation prepares the opening for this grommet hole liner. The same description specifies a 3/4 inch hole liner depth, so installers know how far the liner extends into the panel and can compare that depth to typical desk, shelf, or panel thicknesses when planning cut locations. With an overall diameter of 2 inches stated in the data, the visible flange extends beyond the 1-3/4 inch bore, providing coverage at the surface that hides the raw cut edge. Together, these measurements support predictable layout and consistent visual results across multiple holes on the same project.
The product name describes it as a round wire grommet and the category places it in multimedia and workspace components, so it is suitable anywhere wires pass through desks, cabinets, or organizational panels. A 1-3/4 inch bore hole size, as specified, aligns with a common hole saw dimension, which helps standardize openings across workstations or closet components built from typical sheet goods. The grommet hole liner design referenced in the web description means the piece lines the inside of the bore rather than just covering the top, helping protect both the panel edge and the cables running through. With a 2 inch overall diameter listed, the visible flange remains compact, so it works well where surface space is limited but a finished pass-through is still needed.
The manufacturer part number H-0403-T-11009/C ties this specific grommet to a consistent 1-3/4 inch bore and 3/4 inch liner depth, which helps repeat ordering for future jobs that use the same drilling pattern. The SAP description identifies the color as white, giving installers a predictable, neutral finish that coordinates with many laminate and painted work surfaces without drawing attention to the cable opening. The web description notes that this 1-3/4 inch bore hole size is supported by two types of cover caps, with and without wire holes, allowing a single bore and liner configuration to serve either open cable pass-throughs or closed caps on different stations. That flexibility can streamline layout decisions because the same cut size and liner geometry supports varied wire management approaches while maintaining a consistent appearance.
The grommet is specified for a 1-3/4 inch bore hole diameter, so it fits openings drilled at that size for a precise liner fit.
The hole liner depth is listed as 3/4 inch, which indicates how far the liner seats into the drilled panel or work surface.
The web description states a 2 inch overall diameter, giving a surface flange that slightly overhangs the 1-3/4 inch bore edge.
The SAP description identifies this part as a white grommet, which provides a neutral appearance on many work surfaces.
The web description notes that this 1-3/4 inch bore size has two types of cover caps available, one with wire holes and one without.
This Hughes Supply grommet is identified by manufacturer part number H-0403-T-11009/C, which supports consistent reordering for repeat projects.
This Hughes Supply white round wire grommet pairs a 1-3/4 inch bore hole diameter with a 3/4 inch liner depth and 2 inch overall diameter, giving installers a repeatable drilling pattern. For desks, cabinets, or multimedia work surfaces that need organized cable pass-throughs at a known size, this grommet aligns hole-making with a defined part number and color for straightforward planning.
Sold In: 100 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 10 Each | PGH782WH-X Mfr# H-0782-11009/B10 | Round Wire Grommets, 1-3/4" Bore Hole Plastic Cover Caps, No Wire Cut-Out - Hughes Supply H-0782-11009/B10 | ||||
Sold in: 10 Each | PGH785WH-X Mfr# H-0785-11009/B10 | Round Wire Grommets, 1-3/4" Bore Hole Plastic Cover Caps - Hughes Supply H-0785-11009/B10 | ||||
Sold in: 1 Each | WW63202 Mfr# 063202 090 1 | 1-3/4" - 6" Mandrel Hole Saw | ||||
Sold in: 1 Each | WW63244 Mfr# 0632900044961 1 | 44mm Standard Hole Saw |