Round Wire Grommets, 1-3/4" Bore Hole Grommet Hole Liners - Hughes Supply H-0403-2250/BG10

1-3/4 Bore Hole Grommet For Clean Wire Pass-Through

1-3/4 bore hole grommet describes this Hughes Supply round wire grommet designed to line a 1-3/4 inch bore hole in desks, cabinets, and work surfaces. The piece functions as a grommet hole liner, so the bore edge is covered and shielded where wires or cables route through. The almond color noted in the description helps this grommet blend with matching laminate or painted surfaces, which supports a more finished appearance on visible runs. The overall diameter of 2 inches covers the perimeter of a correctly drilled 1-3/4 inch hole, helping hide minor drill breakout at the surface. A liner depth of 3/4 inch gives stable side contact in typical panel thicknesses, which keeps the grommet seated as wires are pulled or adjusted over time.

Verified Grommet Details That Support Daily Use

• The 1-3/4 inch bore hole size matches a common shop drilling dimension, so installers can use standard 1-3/4 inch bits for consistent, repeatable holes on jobs.
• The 3/4 inch hole liner depth provides engagement along the cut edge of the panel, which helps the grommet track straight and stay aligned when feeding multiple cables.
• The 2 inch overall diameter covers the rim of the bore, which helps mask slight chipping at the entry hole and leaves a cleaner-looking finished surface.
• The grommet is described as almond, giving a light, neutral tone that coordinates with many office, closet, and cabinet color schemes in multimedia and workspace projects.
• The product is identified as a round wire grommet in the multimedia and workspace components category, which aligns it with desk, cabinet, and organizational wire management layouts.

Installation Fit Details For 1-3/4 Inch Bores

This Hughes Supply grommet is specified for a 1-3/4 inch bore hole diameter, so performance depends on drilling that size hole in the work surface. The 3/4 inch hole liner depth gives enough sidewall contact to stabilize the liner inside common panel thicknesses, which helps resist tilting under cable load. With a 2 inch overall diameter, the visible flange overhangs the bore by approximately one-eighth inch per side, which helps visually square the opening even if the drilling wandered slightly. The round wire grommet design focuses on routing cables through the bore, so installers can plan hole placement to align with power strips, devices, and closet or garage organization layouts.

Using This Almond Round Wire Grommet In Projects

Where This 1-3/4 Inch Grommet Works Best

This round wire grommet is categorized under shelf, closet, and garage organization, as well as multimedia and workspace components, so its dimensions support those layouts. The 1-3/4 inch bore hole diameter handles typical bundles for home office, shop, or entertainment wiring, letting cables pass without scraping against raw wood or board. An overall diameter of 2 inches frames the opening cleanly on desktops, cabinet tops, or vertical dividers, which helps when openings are visible to end users. The 3/4 inch liner depth provides a defined channel through the panel, so wires transition smoothly from one side to the other without riding on the edge of the bore. The almond coloration described in the SAP text suits lighter interiors found in closets, garage storage, and many commercial workstations.

Why These Grommet Dimensions Support Repeatable Results

The specified 1-3/4 inch bore hole size lets fabricators standardize drilling with a single bit across multiple panels, which reduces layout changes when repeating the same multimedia or workspace run. A liner depth of 3/4 inch offers enough bearing surface to seat squarely in typical panel stock, which helps the grommet stay plumb when cables are moved or when panels flex slightly. Because the overall diameter is 2 inches, layout marks can be pulled from this finished dimension, simplifying spacing relative to edges, dividers, or adjacent hardware. Identifying this part as Hughes Supply H-0403-2250/BG10 gives a repeatable reference for reorders, so shops can match color and fit on future phases or service visits without reworking openings. The description also notes that the 1-3/4 inch bore size is available in two types of cover caps, with and without wire holes, which allows project planners to coordinate matching caps to this liner in designs that call for either closed or wire-through configurations.

Key Questions About This Hughes Supply Grommet

Select This 1-3/4 Bore Grommet For Clean Runs

The 1-3/4 bore hole grommet from Hughes Supply combines a 1-3/4 inch bore specification, 3/4 inch liner depth, and 2 inch overall diameter to support reliable wire routing in desks, cabinets, and organizational systems. The almond finish and round wire grommet design align well with multimedia and workspace components where cable paths remain visible. Using the H-0403-2250/BG10 identifier through Wurth Baer Supply keeps future orders consistent, so projects that repeat this opening size can maintain the same appearance and fit across phases.