1-3/4 Bore Hole Grommet For Clean Wire Runs

1-3/4 bore hole grommet describes this Hughes Supply round wire grommet that lines a drilled opening so wires pass through a finished surface instead of a raw edge. The bore hole diameter of 1-3/4 inch matches a standard sized cutout, so installers can plan drilling with predictable fit on cabinets, desks, and panels. The hole liner depth of 3/4 inch seats into the material, so the grommet stays nested along the edge of the opening and shields wires right where they contact the panel. An overall diameter of 2 inch covers the cut edge around the hole, so the visible opening looks uniform after drilling. The dark brown color described in the SAP text suits projects that use similar finishes, so the opening blends with wood tones in shelving, closets, or work surfaces.

Key Grommet Details That Support Wire Management

• The 1-3/4 inch bore hole diameter matches a common drilled size, so installers can use a predictable bit and know the grommet will seat evenly in the panel.
• The 3/4 inch hole liner depth engages more of the panel thickness, so the grommet grips the opening and helps keep wire contact on a smooth molded surface.
• The 2 inch overall diameter overlaps the cut edge, so minor drilling marks are covered and the finished opening appears clean and consistent on the face side.
• The grommet hole liner is sold separately from the grommet cover cap, so installers can select the liner component by size first and match cover style as needed.
• Cover caps are offered in versions with and without wire holes, so projects can be set up either for active wire pass-through or for closing off an unused opening.

Installation Fit Around The 1-3/4 Inch Bore

The specified bore hole diameter of 1-3/4 inch guides the drilling step, so the cutout can be sized to suit this Hughes Supply grommet without trial fitting. With a 3/4 inch hole liner depth, the part occupies a controlled length of the bore, so installers can plan around material thickness on typical cabinet and desk panels. The 2 inch overall diameter defines the face footprint, so clearances to nearby edges or hardware can be laid out in advance. Dark brown coloration referenced in the product description supports use on matching decorative surfaces, so the finished opening sits visually within the design of shelving, closet panels, or multimedia work surfaces.

Using This Hughes Supply Grommet On Projects

Where This Dark Brown Grommet Liner Fits Best

This product is described under Shelf, Closet and Garage Organization and Multimedia and Workspace Components, so it suits openings in storage systems and work surfaces that carry wiring. The bore hole diameter of 1-3/4 inch works where a moderately sized opening is needed for power cords or data cables through panels, desks, and cabinet tops. With an overall diameter of 2 inch, the grommet covers the surrounding edge on typical panel layouts, so it fits well in visible locations on closet organizers and workspace furniture. The dark brown reference in the SAP description aligns with many stained wood and dark laminate finishes used in those applications, so the installed grommet appears intentional rather than improvised.

Details That Support Repeatable Wire Hole Results

The defined 1-3/4 inch bore hole diameter allows crews to standardize on a specific drill or hole saw size, so multiple openings across a project accept the same Hughes Supply H-0403-8265/BG10 part. The 3/4 inch hole liner depth creates a repeatable seating length in the material, so the grommet positions consistently from panel to panel and presents a uniform reveal. The 2 inch overall diameter sets a fixed face dimension, so layout lines for multiple grommets in a run can be spaced with known clearances. Separating the grommet hole liner from the grommet cover cap lets installers stage liners first, then choose cover caps with or without wire holes to match the final wiring layout. Availability of cover caps with wire holes supports active cable routing, while cover caps without wire holes allow unused openings to be closed for a cleaner appearance.

Common Questions About The H-0403-8265/BG10 Grommet

Select This 1-3/4 Inch Grommet For Precise Cutouts

This Hughes Supply H-0403-8265/BG10 grommet pairs a 1-3/4 inch bore hole diameter with a 3/4 inch hole liner depth and 2 inch overall diameter, so drilled openings can be laid out, cut, and finished to a consistent pattern across shelving, closets, and workspace projects.