Round Wire Grommets, 1-3/4" Bore Hole Grommet Hole Liners - Hughes Supply H-0403-T-9192/C

1-3/4 Inch Bore Wire Grommet For Clean Runs

1-3/4 inch bore wire grommet describes these Hughes Supply round wire grommets designed as gray grommet hole liners for a 1-3/4 inch bore hole. The grommet hole liner defines the cable pass-through, so cords route through a consistent opening in desks, cabinets, and work surfaces. The 2 inch overall diameter covers the cut edge of the bore, helping create a finished appearance around the opening. The 3/4 inch hole liner depth provides a defined channel through the panel thickness, guiding wires and reducing edge contact on the bore surface. Being part of the Hughes Supply grommet line keeps identification straightforward when standardizing wire pass-throughs across multiple projects. The gray color supports neutral installations where a simple, unobtrusive finish around the opening is preferred in workspace and storage applications.

Key Grommet Details That Support Clean Routing

• The 1-3/4 inch bore hole diameter matches a common cut size, so installers can drill with a standard 1-3/4 inch bit and drop the hole liner into a predictable opening.
• The 3/4 inch hole liner depth gives a defined sleeve through the panel, which helps guide cords and keeps them running against a smooth surface along the bore length.
• The 2 inch overall diameter extends past the edge of the drilled hole, covering minor chipping at the bore edge and leaving a clean, round transition where wires exit the surface.
• The gray grommet finish provides a neutral look that blends into many furniture, closet, or workspace layouts, which helps keep attention on equipment rather than openings.
• The Hughes Supply H-0403-T-9192/C part number ties directly to this gray 1-3/4 inch bore liner, so reorders and matching across jobs stay consistent.

Mounting Fit Around The 1-3/4 Inch Bore Hole

This gray grommet hole liner is sized for a 1-3/4 inch bore hole, so the opening is defined by that drilled diameter before any cap is applied. With a 3/4 inch liner depth, the part engages the panel along most of a typical furniture or cabinet thickness, helping keep the opening aligned through the material. The 2 inch overall diameter provides coverage around the bore perimeter, which supports a neat interface where cables pass through surfaces. As a grommet hole liner in the Hughes Supply system, it sets up the opening so a compatible grommet cover cap can finish the top side according to the selected style.

Using This H-0403-T-9192/C Grommet In Projects

Where This Gray Grommet Hole Liner Fits Best

This Hughes Supply gray grommet hole liner is suited to projects needing an organized wire pass-through in shelf, closet, or garage organization setups, as well as multimedia and workspace components. The 1-3/4 inch bore hole size lines up with a common cutting dimension, so installers working on desks, counters, or cabinets can rely on a standard bit size for repeat openings. Within multimedia and workspace layouts, the 2 inch overall diameter offers enough flange to cover the cut edges on laminated panels or wood tops, helping maintain a tidy surface appearance. The 3/4 inch hole liner depth supports panels where a defined channel is useful for routing power, data, or low-voltage lines through furniture or storage runs.

Why The Bore, Depth, And Diameter Support Results

The combination of 1-3/4 inch bore hole diameter and 3/4 inch hole liner depth gives a consistent passage size, which helps keep wire bundles organized as they pass through furniture and cabinetry. The 2 inch overall diameter provides a stable bearing surface around the opening, which is useful when aligning the liner with the drilled bore on repetitive installations. Being part of the Hughes Supply grommet offering with the H-0403-T-9192/C identifier allows this liner to be matched with cover caps that are available with or without wire holes, so installers can select top-side treatments that match their cable layout needs. In shelf, closet, and garage organization projects, this combination of dimensions and options helps maintain a controlled route for cords while keeping the opening visually finished across multiple locations.

Common Questions About This Hughes Wire Grommet

Select This Grommet For Consistent Bore Openings

The Hughes Supply H-0403-T-9192/C gray grommet hole liner pairs a 1-3/4 inch bore hole size with a 3/4 inch liner depth and 2 inch overall diameter to standardize wire openings. For projects that benefit from repeatable cable pass-throughs across desks, cabinets, or storage systems, this round wire grommet establishes a controlled, finished path that matches common drilling practices. Choosing this configuration supports straightforward layout work wherever a clean, neutral wire opening is needed in shelf, closet, or garage organization and multimedia or workspace applications.