Round Wire Grommets, 1-3/4" Bore Hole Grommet Hole Liners - Hughes Supply H-0403-T-8265/C

1-3/4 Inch Bore Hole Grommet For Wire Runs

1-3/4 inch bore hole grommet from Hughes Supply is a round wire grommet designed for a 1-3/4 inch bore hole, so it lines the cutout cleanly and protects cables as they pass through work surfaces. The product is identified as a grommet hole liner in dark brown, which helps visually blend into many wood-tone or darker laminate tops in multimedia, closet, or workspace builds. This round wire grommet is classified under grommets for multimedia and workspace components, so it suits desk, counter, and cabinet projects where cords need a tidy pass-through. The liner works together with a matching grommet cover cap, giving you a neat finished edge at the hole and a controlled opening for wiring. That combination supports organized routing for power, data, and low-voltage lines through woodworking installations.

Key Wire Grommet Details For Project Planning

• The 1-3/4 inch bore hole size sets the exact drill or cutout dimension, so installers can prepare worktops and panels accurately before fitting the grommet hole liner.
• The product uses a hole liner depth of 3/4 inch, which defines how far the liner seats into the panel and helps match to typical desk or shelf thicknesses for a secure fit.
• The grommet has an overall diameter of 2 inches, giving a defined flange size that covers the edge of the bore and helps hide minor chipping around the drilled hole.
• The part is described as dark brown, so it coordinates with darker finishes and can visually recede on wood-tone cabinetry, shelving, or workspace components.
• The part is a Hughes Supply round wire grommet, aligning with the manufacturer part number H-0403-T-8265/C for straightforward product identification and repeat ordering.

Installation Sizing And Grommet Fit Details

This 1-3/4 inch bore hole grommet uses the bore diameter as the primary installation dimension, so a 1-3/4 inch hole saw or equivalent cutout provides the seating opening for the liner. Once the hole is prepared, the 3/4 inch hole liner depth sets how much of the grommet nests into the panel, which matters when working with standard worktops, closet panels, or cabinet decks. The 2 inch overall diameter defines the outer flange, so installers know the visible footprint on the finished surface and can layout clearances from edges or adjacent components. With these fixed dimensions, tradespeople can coordinate drilling operations, routing paths, and spacing with other hardware in the same run.

Using This Round Wire Grommet In Real Projects

Where This Round Wire Grommet Works Best

This round wire grommet from Hughes Supply is categorized under multimedia and workspace components, so it fits well into desks, counters, and cabinet tops that carry power or data lines. The 1-3/4 inch bore hole size gives enough room for multiple cables, making it suitable for computer stations, office work surfaces, or shop benches that support equipment wiring. In closet or garage organization projects, the same grommet hole liner can be applied to shelves where chargers, lighting leads, or tool cords need a clean pass-through. The dark brown description ties it to wood-tone casework and darker finishes, allowing it to sit discreetly in panels without drawing attention away from the overall installation.

Details That Support Clean, Repeatable Cutouts

The specified 1-3/4 inch bore hole diameter creates a consistent target dimension across jobs, which simplifies jig setup and repeat drilling when building multiple panels or identical workstations. A fixed 3/4 inch hole liner depth means the grommet occupies a predictable portion of the panel thickness, helping installers plan around internal obstructions or structural members under the surface. The 2 inch overall diameter gives a clear edge cover, so minor tear-out at the hole perimeter remains hidden once the grommet is seated, saving rework on otherwise usable parts. The identification as a grommet hole liner matched to a separate grommet cover cap provides a two-part solution, where the liner protects the cut edge and the cap manages the visible opening for cords. Using the H-0403-T-8265/C part number supports consistent reordering and pairing with the appropriate cover style, which helps maintain the same look and opening type across a full installation.

Common Questions About This Hughes Supply Grommet

Select This Grommet For Sized Wire Pass-Throughs

The Hughes Supply 1-3/4 inch bore hole grommet gives you a defined 1-3/4 inch cutout, a 3/4 inch liner depth, and a 2 inch overall diameter, so your drilled openings align with the hardware every time. The dark brown round wire grommet suits multimedia, workspace, and organizational builds where cables must pass through panels with a finished look. Using the H-0403-T-8265/C identifier, this grommet can be specified for new work or matched in existing installations that already use the same Hughes Supply component.