Round Wire Grommets 1-3/4 Bore For Clean Wire Runs

Round wire grommets 1-3/4 bore from Hughes Supply create a finished opening in a 1-3/4 inch bore hole, so cable pass-throughs in desks or cabinets look clean and controlled. This grommet is identified as a grommet hole liner in the product description, which means it lines the raw cutout edge for a more professional result in multimedia and workspace components. The SAP description specifies white color, so the part blends easily with light-colored tops and organizational panels where a neutral look is needed. The stated product class of grommets defines its role as an opening treatment rather than a structural fitting, which suits wire and cable routing in office, closet, and garage organization projects. The manufacturer part number H-0403-11009/B10 gives installers a clear reference when matching project specs or reordering the same grommet hole liner.

Key Grommet Hole Liner Details For Projects

• The 1-3/4 inch bore hole size matches a common drill or hole saw dimension, which simplifies layout for desk, cabinet, or panel cutouts where wires need a defined pass-through.
• The product description notes that the grommet hole liner and grommet cover cap are sold separately, so installers can choose only the liner when a simple ring finish is needed or pair it with a cap style when coverage is required.
• The same description states that the 1-3/4 inch bore hole size is available in two types of cover caps, with and without wire holes, which lets projects use either closed caps for future routing or open caps where active cables already pass through.
• The bore hole diameter of 1-3/4 inch and overall diameter of 2 inch, as listed in the web description, give a clear edge margin around the cutout, which helps when positioning near adjacent hardware or panel edges.
• The specified hole liner depth of 3/4 inch indicates how far the liner seats into the panel, so fabricators can judge compatibility with typical work surface or shelving thicknesses in multimedia and workspace components.

Grommet Fit, Bore Size, And Panel Interface

The grommet hole liner uses a 1-3/4 inch bore hole diameter, which means the installer bores a 1-3/4 inch round opening to accept the liner wall. The web description further calls out an overall diameter of 2 inch, giving a 1/8 inch radial lip beyond the cutout that helps cover slightly rough drilling edges. The listed hole liner depth of 3/4 inch describes how much of the component extends into the hole, which is especially relevant when working with standard furniture panels and tops used in shelf, closet, and garage organization. Because the product is categorized under multimedia and workspace components, its sizing supports typical desk and equipment console layouts, helping keep cable routes controlled at the surface.

Using This Hughes Supply Grommet In Workspaces

Where This 1-3/4 Inch Bore Grommet Performs Best

The category listing under shelf, closet and garage organization and multimedia and workspace components points this round wire grommet toward organized environments where cables need a planned path. In applications such as office desks, workstations, or equipment cabinets, the 1-3/4 inch bore hole diameter keeps the opening tight enough to visually frame a modest bundle of cords without leaving an oversized cut. The 2 inch overall diameter creates a modest flange, which sits neatly on finished surfaces without dominating the layout. With the hole liner depth specified at 3/4 inch, the liner occupies a meaningful section of the panel thickness, which improves the visual transition from surface to opening in typical wood-based panels or similar materials. The white color, stated in the SAP description, supports projects that favor a light, neutral appearance across storage and work areas.

Details That Support Repeatable Cutouts And Finishes

The detailed bore hole diameter of 1-3/4 inch, combined with the 2 inch overall diameter, gives fabricators a reliable pairing between drill tooling and finished opening size, which is helpful when repeating the same layout across multiple stations or panels. The hole liner depth of 3/4 inch provides a fixed engagement into the bore, which helps cuts feel consistent from one panel to the next when using standard substrate thicknesses. The web description states that the 1-3/4 inch bore hole size is available with cover caps that have wire holes or no wire holes, allowing planners to specify matching caps for active cable routes or for locations reserved for future wiring. Since these grommet hole liners and cover caps are sold separately, part number H-0403-11009/B10 anchors the liner selection while separate cap choices can be matched to the same bore size for uniform installations across multimedia and workspace components.

Common Questions About This 1-3/4 Inch Bore Grommet

Select This Grommet Hole Liner For Defined Cable Openings

The Hughes Supply Round Wire Grommets, 1-3/4 inch bore hole grommet hole liners in white provide a dedicated way to finish cable openings in desks, cabinets, and panels. With a 1-3/4 inch bore hole diameter, 2 inch overall diameter, and 3/4 inch hole liner depth, the part creates a predictable interface between the drilled opening and visible surface. For projects within shelf, closet and garage organization or multimedia and workspace components, the H-0403-11009/B10 designation helps standardize this opening size so cable routes and future cover cap selections follow the same dimensions across the installation.