1-3/4 Bore Wire Grommet For Clean Cable Holes

1-3/4 bore wire grommet describes this Hughes Supply round grommet designed to line a 1-3/4 inch bore hole, so drilled openings in desks, cabinets, or workstations gain a defined, finished edge instead of a raw cut surface. The grommet serves as a hole liner, so material around the opening is separated from passing wires, which matters when you want to reduce abrasion and keep edges from wearing against cable jackets. The bore hole diameter is 1-3/4 inch, which helps installers match the grommet directly to common hole saw sizes for predictable fits in wood or similar substrates. A black finish keeps the hole visually controlled in darker tops or panels, so the opening reads as a deliberate pass-through instead of a rough service hole. This round format fits standard circular bores, supporting straightforward drilling and layout work.

Key Grommet Details That Support Clean Installs

• The 1-3/4 inch bore hole diameter matches a defined cut size, so installers can drill once with a 1-3/4 inch hole saw and expect this grommet liner to register consistently in the opening.
• The hole liner depth is 3/4 inch, which allows the grommet to engage the edge of typical panel thicknesses, so the lined surface guides wires through a controlled channel rather than a sharp edge.
• The overall diameter of 2 inches means the grommet flange slightly overhangs the bore, so minor drilling marks around the hole are covered for a neater finished appearance in visible work surfaces.
• The black color ties in with dark laminates or painted panels, so the pass-through reads as a planned wiring point and helps the opening visually recede in multimedia and workspace components.
• Grommet hole liner and grommet cover cap are identified separately, so installers can treat the liner as a stable edge piece and select a matching cover cap style based on how they want cables to exit.

Installation Fit For 1-3/4 Inch Bore Openings

This Hughes Supply grommet is specified for a 1-3/4 inch bore hole diameter, so layout work centers on that single drill size when planning pass-through locations in desks, cabinets, or shelving. The 3/4 inch hole liner depth provides edge coverage along the sidewall of the bore, which supports smoother cable movement through the opening and reduces contact with the substrate. With a 2 inch overall diameter, the visible flange overlaps the cut slightly, which hides small tear-out around the perimeter and tightens the visual line where the hole meets the finished surface. Because the grommet functions as a hole liner, it becomes the controlled interface between the drilled opening and any wiring routed through, which helps keep wiring paths consistent across multiple stations in a project.

Using This Grommet In Work Surfaces And Stations

Where This 1-3/4 Bore Grommet Works Best

This round wire grommet from Hughes Supply fits into a 1-3/4 inch bore hole, which aligns with openings commonly drilled in worktops, multimedia stations, and cabinetry where cables need a defined route. The 3/4 inch hole liner depth engages the sidewall of the hole, so the grommet can sit securely in panels that provide enough thickness to support that engagement. With a 2 inch overall diameter, the flange neatly covers the cut edge, which helps in customer-facing applications like office furniture or retail fixtures where exposed bore edges would distract from the finished surface. The black color coordinates with many workspace components categorized under multimedia and organization, so the grommet can blend into darker laminates or painted environments and maintain a uniform look across multiple openings.

Details That Support Repeatable Cutouts And Finishes

The defined 1-3/4 inch bore hole diameter gives installers a single target size, which supports repeatable drilling across several tops without field measuring each opening against the grommet. That fixed dimension ties directly to common 1-3/4 inch hole saws, allowing crews to standardize tooling on the job. The 3/4 inch depth of the hole liner shapes how the grommet engages the material thickness, so crews can plan panel selections knowing how much of the sidewall will be lined. A 2 inch overall diameter establishes the visible footprint on the surface, which is useful when laying out holes near edges or other hardware because the installer can allow proper clearance for the flange. Since the web description notes that the grommet hole liner and cover cap are identified separately and that 1-3/4 inch bore size is available in two types of cover caps, with and without wire holes, projects can use the same liner dimension while choosing a cap style that either closes the hole or passes wires through.

Common Questions About This Hughes Supply Grommet

Select This 1-3/4 Bore Grommet For Defined Pass-Throughs

This Hughes Supply H-0403-9000/BG10 grommet pairs a 1-3/4 inch bore hole diameter with a 3/4 inch liner depth and 2 inch overall diameter, so each drilled opening gains a predictable, lined path for wires. The black round profile suits multimedia and workspace components where organized cable routing and a clean appearance are part of the finished job. For projects that call for consistent cut sizes and a controlled edge around wiring holes, this grommet offers a defined set of dimensions to build into layouts.