
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
The 1-3/4 bore wire grommet from Hughes Supply is a round grommet hole liner designed to finish a 1-3/4 inch bore hole, so cable pass-throughs in desks, cabinets, or workstations look clean and intentional. The bore hole diameter of 1-3/4 inch sets the cutout size, giving installers a clear drilling target when laying out multimedia or workspace components. A hole liner depth of 3/4 inch covers the interior of the cut edge, which helps hide rough drilling marks and creates a more finished opening through typical panel thicknesses. The overall diameter of 2 inch defines the visible trim ring size, which matters when planning clearances to adjacent parts or edges. The grommet hole liner works with matching grommet cover caps, so tradespeople can pair the correct cap style to the opening for efficient cable routing.
This grommet hole liner is sized around a bore hole diameter of 1-3/4 inch, so the drilling operation centers on that dimension for accurate fit. The 3/4 inch hole liner depth means the liner extends into the hole, which helps align the part during insertion and stabilizes it in typical panel thickness ranges. With an overall diameter of 2 inch, the visible flange covers the drilled edge around the 1-3/4 inch bore, which is useful when a slightly rougher hole cut still needs a finished appearance. Sold in full box quantities, the part supports repetitive installation where the same 1-3/4 inch cut pattern is used across multiple openings.
This round wire grommet belongs to the multimedia and workspace components category, so it aligns well with projects involving desks, cabinets, and other work surfaces that need cable pass-throughs. The 1-3/4 inch bore hole diameter scales to common cable clusters on office or shop furniture, allowing multiple leads to pass through a single opening. Its 3/4 inch hole liner depth suits typical panel builds found in cabinetry and closet or garage organization systems, so the liner seats into the material rather than sitting only at the surface. The 2 inch overall diameter keeps the visible trim compact while fully surrounding the 1-3/4 inch bore, which helps when routing wires near backsplashes, uprights, or other hardware in tight layouts.
The defined bore hole diameter of 1-3/4 inch lets installers standardize on a single hole saw or bit size, which supports repeatable cuts across multiple cabinets or worktops. With a hole liner depth of 3/4 inch, the part engages a significant section of the drilled opening, which helps keep alignment consistent from piece to piece during production runs. The 2 inch overall diameter is predictable, so it can be dropped directly into shop drawings and CNC programs for clearances and edge spacing. Two types of cover caps offered for the 1-3/4 inch bore hole, with and without wire holes, allow repeat job setups where some openings stay closed and others pass cables while sharing the same cut size. Full box quantities support stocking this Hughes Supply grommet for ongoing work, reducing re-layout time when future projects call for the same 1-3/4 inch bore pattern.
This grommet uses a bore hole diameter of 1-3/4 inch, so installers drill that size opening for a proper liner fit in desks, cabinets, or workspace panels.
The grommet hole liner has a depth of 3/4 inch, so it extends into the panel and covers the cut edge through common surface thicknesses.
The round wire grommet has an overall diameter of 2 inch, so the visible flange covers the perimeter around the 1-3/4 inch bore hole.
The 1-3/4 inch bore hole size is available in two types of cover caps, with and without wire holes, so openings can be matched to cable pass-through needs.
The grommet hole liner and grommet cover cap are sold separately, which lets buyers order only the specific components required for each installation.
This grommet is sold in full box quantities, supporting jobs that repeat the same 1-3/4 inch bore pattern across multiple cabinets or workstations.
The black 1-3/4 inch bore grommet from Hughes Supply gives a defined 1-3/4 inch bore hole diameter, a 3/4 inch hole liner depth, and a 2 inch overall diameter, so layouts, drilling, and finished openings stay consistent across desks, cabinets, and multimedia work areas.
Sold In: 100 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 100 Each | PGH782BL Mfr# H-0782-9000/C | Round Wire Grommets, 1-3/4" Bore Hole Plastic Cover Caps, No Wire Cut-Out - Hughes Supply H-0782-9000/C | ||||
Sold in: 100 Each | PGH785BL Mfr# H-0785-T-9000/C | Round Wire Grommets, 1-3/4" Bore Hole Plastic Cover Caps - Hughes Supply H-0785-T-9000/C | ||||
Sold in: 10 Each | PGH782BL-X Mfr# H-0782-9000/BG10 | Round Wire Grommets, 1-3/4" Bore Hole Plastic Cover Caps, No Wire Cut-Out - Hughes Supply H-0782-9000/BG10 | ||||
Sold in: 10 Each | PGH785BL-X Mfr# H-0785-9000/BG10 | Round Wire Grommets, 1-3/4" Bore Hole Plastic Cover Caps - Hughes Supply H-0785-9000/BG10 | ||||
Sold in: 1 Each | WW63202 Mfr# 063202 090 1 | 1-3/4" - 6" Mandrel Hole Saw | ||||
Sold in: 1 Each | WW63244 Mfr# 0632900044961 1 | 44mm Standard Hole Saw |