Omega National CO2 Series Maple Tambour Doors 15"W x 3/16"D, Solid Wood - CO2-SMA-1

NOTE: As of 4/13/26, Omega National's prefix has changed from NP to RS. This part number has changed from NPSW30M-15ST2A to RSSW30M-15ST2A.

Omega Maple Tambour Door Kit For Appliance Garages

Omega National CO2 Series Maple Tambour Doors provide a solid wood tambour door and matching track system for building an appliance garage that hides countertop equipment while keeping it ready for use. The kit is identified as CO2-SMA-1, so it can be specified consistently across cabinet runs and shop drawings. The tambour door is solid wood in maple, which gives a woodworker a species that finishes and blends with many standard maple cabinet programs. The tambour uses 3/16 inch thick, 3/4 inch wide solid wood slats, so the door follows the track smoothly while still presenting a continuous wood face in the opening. Those slats are mounted on a cloth backing, which allows the door to flex around the track while holding the individual slats in alignment during repeated operation. The door size of 15 inches wide by 18 inches high matches common appliance garage cabinet openings in upper cabinet layouts.

Tambour Door And Track Details That Save Time

• The tambour door set includes a solid wood tambour door with wood pull handle, which gives the user a finished wood grip without extra fabrication work on a separate pull.
• The spring tension tambour track system is supplied with the door set, so the door can open and close along a controlled path that is already matched to the tambour construction.
• The track system consists of two PVC guide rails, so the door rides in a defined channel that helps keep travel consistent in the cabinet opening.
• The track system uses wood dowels and donut components, which support the spring tension function that returns or positions the tambour during movement.
• The cloth backing on the tambour slats allows the solid wood pieces to follow the curved track, which lets the door roll up out of the way above or behind the cabinet opening.
• Two available door sizes, 15 inches by 18 inches and 24 inches by 18 inches, give layout options for different cabinet bay widths using the same CO2 series system.

Maple Tambour Door Track Fit And Cut-Down Options

The 15 inch by 18 inch maple tambour door size works in appliance garage cabinet openings designed around that width and height, so cabinet face frames and interiors can be planned around a known clear opening. Kits can be cut down to narrower widths and still function properly, so a shop can adapt a standard CO2-SMA-1 kit to a custom cabinet width without changing the fundamental track concept. The spring tension tambour track system is designed around the supplied PVC guide rails, wood dowels, donuts, and tension spring, so the tambour door, backing, and track work together as a matched assembly. The solid wood slats at 3/16 inch thick and 3/4 inch wide follow the PVC guide rails around the appliance garage curve, which helps maintain a consistent reveal and motion path as the door opens and closes.

Using This Maple Tambour Door In Cabinet Projects

Where This CO2-SMA-1 Tambour Door Works Best

This tambour door and track kit is classified under appliance garages and tambour doors, so it fits cabinet projects where small countertop appliances need to be concealed inside upper or end cabinets. The maple solid wood tambour construction suits kitchen or bath cabinet runs that already use maple doors and face frames, so visual alignment is easier across the installation. The 15 inch wide by 18 inch high size supports appliance garages built into standard wall cabinet depths, giving a dedicated bay where the tambour rolls up instead of swinging out. The matching 24 inch by 18 inch option in the same CO2 series allows a shop to keep the same system across wider openings, which simplifies planning when a kitchen uses more than one appliance garage.

Why The Spring Tension Track And Slats Matter

The spring tension tambour track system uses two PVC guide rails with wood dowels, donut components, and a tension spring, so the tambour moves along a defined curve while the spring manages the pull on the door. That construction supports repeatable door travel in the appliance garage opening, which is important when doors are operated many times a day. The solid wood 3/16 inch thick, 3/4 inch wide slats with cloth backing create a flexible yet continuous surface, so the door can roll along the PVC rails while still presenting a solid maple face when closed. The wood pull handle attached to the solid wood tambour door gives a direct grip point at the front, which simplifies everyday opening without adding separate pull hardware. Kits can be cut down to narrower widths and still function properly, so installers can adjust a CO2-SMA-1 kit to fit a slightly smaller opening while keeping the same spring tension track behavior. The tambour is described specifically as solid wood, which supports finishing processes typically used for maple cabinetry in appliance garage installations.

Key Questions About This Maple Tambour Door Kit

Selecting This Maple Tambour Door For Appliance Storage

This maple tambour door and track kit from Omega National Products gives cabinet shops and serious DIY builders a defined CO2-SMA-1 system for appliance garages, combining a solid wood tambour door, wood pull handle, and spring tension tambour track. The 15 inch by 18 inch size and cut-down capability support both standard and narrower openings, while the solid wood slats with cloth backing and PVC guide rail track system help the door move smoothly in everyday use. For projects needing a coordinated appliance garage solution in maple, this CO2 series tambour door and track assembly aligns the door construction and track components into one matched approach.