NOTE: As of 4/13/26, Omega National's prefix has changed from NP to RS. This part number has changed from NPSW30RO-15ST2A to RSSW30RO-15ST2A.

Omega National CO2 Red Oak Tambour Door Use

Omega National CO2 Series Red Oak Tambour Doors give you a solid wood solution for building appliance garages, so upper counter areas can be closed off while keeping access easy. The tambour door in this CO2-SRO-1 kit uses 3/16 inch thick by 3/4 inch wide solid wood slats with cloth backing, which lets the door flex smoothly around the track while presenting a continuous wood face on the cabinet. The red oak tambour is sized 15 inches wide by 18 inches high, matching common appliance garage openings and saving layout time when designing standard bays. Because the kit is part of Omega National Products CO2 Series, it keeps materials and construction consistent across similar tambour installations in the same project. The solid wood construction supports machining, sanding, and finishing workflows typical in cabinet shops using red oak components.

Tambour Door Kit Details That Save Build Time

• The tambour door kit provides a solid wood tambour door with a wood pull handle, so the opening face and hand contact point stay in the same material family and can be finished together for a unified look in the cabinet run.
• The spring tension tambour track system manages the door movement, which helps the tambour return and track consistently in daily use, reducing callbacks related to dragging or misaligned door action in appliance garages.
• The track system uses two PVC guide rails, giving the door a defined path that stabilizes side-to-side motion as it moves, which is important when you are fitting the unit into a tight cabinet opening where edge rub can cause wear.
• Wood dowels in the track system support the tambour as it curves, which helps maintain a controlled radius through the turn, keeping the slats aligned so the door face stays even when the unit is cycled repeatedly.
• Donuts and a tension spring are part of the track system, and this combination works with the spring tension design to store and release energy smoothly, which supports predictable door travel during opening and closing.

Track System And Door Sizing For Cabinet Fit

The CO2-SRO-1 tambour door and track kit is designed around a 15 inch wide by 18 inch high door size, so you can plan appliance garage openings around a known clear dimension. The 3/16 inch thick slats with 3/4 inch width work with the spring tension tambour track system to follow the guide radius without binding, which simplifies routing or shaping the cabinet chase to match the track path. The two PVC guide rails define where the tambour runs, so cabinet side panels can be built to that reference, speeding layout during repeatable production. Kits can be cut down to narrower widths and still function properly, which lets you trim the assembly to fit smaller cabinet bays while retaining the same track and tension behavior across a run of mixed-width garages.

Using This Tambour Door Kit In Cabinet Projects

Where This Red Oak Tambour Door Works Best

This Omega National Products tambour door and track kit belongs in appliance garages and similar cabinet applications where a vertical opening needs a flexible closure. The 15 inch by 18 inch solid wood tambour format aligns with common counter-height cabinet layouts, so it integrates well into upper runs over work surfaces. The red oak species matches other red oak cabinet components, letting you keep face frames, doors, and appliance garage fronts in the same material. Because the tambour is solid wood with cloth backing, it supports finishing steps typical in red oak cabinetry, allowing stain or clear finishes to be carried across adjacent doors and trim. The spring tension tambour track system and PVC guide rails suit built-in garage wells, where the door must roll smoothly back into a cavity and follow the same path each time.

Why The CO2-SRO-1 Design Supports Consistent Results

The use of 3/16 inch thick by 3/4 inch wide solid wood slats with cloth backing gives the CO2-SRO-1 tambour predictable flexibility, which helps the door conform to the track radius without flat spots that could show at the cabinet face. Two PVC guide rails in the track system stabilize lateral movement, so the tambour stays centered during travel and reduces edge wear at the cabinet sides over repeated cycles. Wood dowels, donuts, and a tension spring combine into a spring tension tambour track system, which manages door movement by providing controlled resistance and return through the full range of motion. The 15 inch by 18 inch door size serves as a standard reference, while the ability to cut kits down to narrower widths and still function properly lets you adapt the same part number to multiple cabinet widths without changing the operating characteristics. Working within the Omega National CO2 Series keeps tambour design, component mix, and door behavior consistent across grouped appliance garages in a project.

Common Questions About This Tambour Door And Track

Choose This CO2-SRO-1 Kit For Red Oak Tambours

The Omega National CO2 Series Red Oak Tambour Doors CO2-SRO-1 kit provides a coordinated 15 inch by 18 inch solid wood tambour door and a spring tension tambour track system for appliance garage projects. With 3/16 inch thick, 3/4 inch wide solid wood slats on cloth backing and two PVC guide rails, the assembly is set up for smooth, repeatable door travel inside a cabinet well. Because kits can be cut down to narrower widths and still function properly, one part number can support multiple opening sizes while keeping the same red oak material and movement characteristics throughout the installation.