NOTE: As of 4/13/26, Omega National's prefix has changed from NP to RS. This part number has changed from NPSW30C-15ST2A to RSSW30C-15ST2A.

Omega National Cherry Tambour Doors For Appliance Garages

Omega National CO2 Series Cherry tambour doors are solid wood door and track kits designed for building appliance garages in kitchen or bath cabinets. The solid wood tambour door uses 3/16 inch thick, 3/4 inch wide slats with cloth backing, which creates a flexible rolling door from individual cherry slats that follows the track while keeping the face visually continuous. The door has a wood pull handle, so the operator grips a material consistent with the door surface for smooth day-to-day use. The tambour track system uses a spring tension design, which returns the door consistently along the guide path for repeatable open and close motion over time. This CO2-SCH-1 model is a 15 inch wide door size, so it suits projects built around that opening width before any trimming. The tambour is part of Omega National Products CO2 Series, giving installers a defined product line and part number for repeat ordering.

Key Tambour Door Details For Cabinet Projects

• The tambour is solid wood with 3/16 inch thick, 3/4 inch wide slats on cloth backing, which gives a traditional wood appearance while allowing the door to roll smoothly around the track curve in appliance garages.
• The system uses a spring tension tambour track, so the tension spring works with the door movement and helps the tambour track consistently in the guide rails during repeated opening and closing.
• The track system uses two PVC guide rails, so the rolling wood slats ride on a stable, low-friction path that supports the cloth-backed construction in typical cabinet environments.
• The kit uses wood dowels and donut components in the track system, which tie the spring tension and rails together so the motion of the door is controlled within the specified assembly design.
• The CO2-SCH-1 cherry tambour door is listed at 15 inches wide and 3/16 inch thick, so it aligns with projects laid out for that face width and thickness in cabinet face frames or panels.
• The CO2 Series tambour doors are available in two door sizes, 15 inch wide by 18 inch high and 24 inch wide by 18 inch high, so installers can choose a door height and width combination that fits typical appliance garage openings.

Tambour Door Track Fit And Size Adjustment

The CO2-SCH-1 cherry tambour door is specified as 15 inches wide and 3/16 inch thick, which gives a clear starting width and panel thickness for cabinet layout around the opening. The tambour doors in this CO2 Series are 18 inches high, so the appliance garage opening can be framed to that vertical dimension for proper door travel in typical upper cabinet installations. These tambour kits can be cut down to narrower widths and still function properly, which allows trimming the width to match actual cabinet openings while maintaining the rolling action. The spring tension tambour track system uses two PVC guide rails, wood dowels, donuts, and a tension spring, so the fit between the door and track is defined by those parts for consistent door guidance inside the cabinet.

Using Cherry Tambour Doors In Appliance Garage Builds

Where This Cherry Tambour Door System Fits Best

This Omega National Products CO2 Series tambour door and track system is categorized under appliance garages and tambour doors, so it is aimed at projects creating enclosed storage for countertop appliances. The cherry tambour door at 15 inches wide by 18 inches high gives a size that works with many upper cabinet appliance garage layouts using a similar opening. The door thickness of 3/16 inch helps it roll into the PVC guide rails and follow the track path without taking excessive depth from the cabinet interior. The solid wood cherry construction ties into wood cabinet programs where matching or coordinating species matters across fronts and doors. The integrated wood pull handle on the tambour face allows direct operation from the front of the cabinet without adding a separate pull piece.

Why The Track And Spring Design Support Smooth Operation

The tambour track system in this CO2-SCH-1 model uses two PVC guide rails, which give the rolling slats a defined channel so the door path is repeatable every time it is opened or closed. The wood dowels in the system connect elements of the spring tension mechanism, so the door movement is tied mechanically to the tension control for smooth travel along the rails. Donut components are part of the track assembly and interact with the tension spring, so the spring force works against the rolling motion in a controlled way rather than acting directly on the slats. The tension spring provides the spring tension that defines how the door reacts through its travel, which affects how the tambour behaves as it moves through the vertical and horizontal sections of the guide rails. The cloth backing on the wood slats lets the door flex as a single sheet while the track parts manage the path, making the system suited to repeated appliance garage use.

Common Questions About The CO2-SCH-1 Tambour Door

Selecting This Cherry Tambour Door For Your Project

The Omega National CO2 Series cherry tambour doors with spring tension track give cabinet builders a defined solution for appliance garage openings at 15 inches wide and 18 inches high. The solid wood construction with 3/16 inch thick, 3/4 inch wide slats and cloth backing delivers a rolling door that follows the PVC guide rails for predictable motion. The ability to cut the kit down to narrower widths keeps the CO2-SCH-1 flexible across different cabinet runs that share a similar height. For projects calling for a cherry wood appliance garage door with an integrated track system, this CO2-SCH-1 model provides a matched tambour and track assembly under a single Omega National Products part number.