Omega National CO2 Series Cherry Tambour Doors 24"W x 3/16"D, Solid Wood - CO2-SCH-2

NOTE: As of 4/13/26, Omega National's prefix has changed from NP to RS. This part number has changed from NPSW30C-24ST2A to RSSW30C-24ST2A.

Cherry Tambour Door Kit For Appliance Garages

Cherry tambour door kit describes this Omega National CO2 Series set, which provides a solid wood tambour door and a spring tension tambour track system for building an appliance garage in a cabinet opening. The 24 inch wide x 18 inch high cherry door size gives a defined opening height that suits typical countertop appliance garage layouts. The solid wood tambour construction uses 3/16 inch thick by 3/4 inch wide slats with cloth backing, so the door forms a flexible rolling surface while still presenting a solid wood face across the opening. The integrated wood pull handle on the tambour door gives a consistent gripping point, which helps daily operation stay predictable. The CO2-SCH-2 kit is part of the Omega National tambour door line, so it fits into projects that standardize on that product family. The tambour and track system are designed together, which supports smooth door travel along the guided path.

Key Tambour System Details For Cabinet Projects

• The tambour door set uses solid wood tambour with a wood pull handle, so the door presents a uniform wood face and a defined grip point for repeatable opening and closing in an appliance garage application.
• The track system is a spring tension tambour track design, which applies controlled tension on the rolling door and supports consistent movement along the travel path as the door opens and closes.
• The track system consists of two PVC guide rails, which define the side channels the tambour follows and help keep the door aligned during operation inside the cabinet.
• Wood dowels within the system work with the tambour and track layout, supporting the rolling action so the slats follow the radius required by the appliance garage configuration.
• Donut components and a tension spring are part of the track system, forming the tensioning mechanism that manages the wrap and return of the tambour during repeated cycles.
• Kits can be cut down to narrower widths and still function properly, allowing a 24 inch wide assembly to be sized to a smaller cabinet opening while retaining the intended track and door performance.

Tambour Door Fit, Sizing, And Track Alignment

The CO2-SCH-2 cherry tambour kit uses a 24 inch wide door size, which establishes the starting width for planning an appliance garage opening before any cutting to a narrower dimension. The 18 inch door height defines the vertical travel distance, which guides how high the opening can be within a wall or base cabinet. The tambour slats are 3/16 inch thick and 3/4 inch wide with cloth backing, so they roll along the PVC guide rails while maintaining a consistent thickness profile at the track interface. The two PVC guide rails set the side boundaries for the door path, which helps the tambour follow a smooth curve without binding when routed along the appliance garage path. The spring tension track system relies on the defined slat thickness and cloth-backed flexibility, so the door can wrap around inside the cabinet while staying in the intended track position.

Using This Cherry Tambour Door In Cabinet Work

Where This CO2 Series Cherry Tambour Door Fits

This Omega National CO2 Series cherry tambour door and track system is described for creating an appliance garage, aligning it with kitchen or bath cabinet projects that need a roll-up front. The 24 inch wide by 18 inch high door format matches openings designed around that footprint, and the solid wood cherry construction coordinates with cherry cabinetry in those spaces. The product is categorized under Appliance Garages and Tambour Doors, so its role centers on building a retracting front that rolls up and back instead of swinging on hinges. The solid wood tambour slats with cloth backing allow the door to follow the path defined by the two PVC guide rails, which suits upper or corner cabinet layouts where a curved travel path is required. The integrated wood pull handle on the tambour gives a fixed grasp point at the lower edge, which supports straightforward access to stored appliances within the garage area.

Why The CO2-SCH-2 Track Details Support Repeatable Results

The spring tension tambour track system in the CO2-SCH-2 kit uses donuts and a tension spring, so the door benefits from a controlled pull that guides the roll-up and return during each use. The two PVC guide rails work with the 3/16 inch thick, 3/4 inch wide solid wood slats and cloth backing, creating a matched interface that reduces lateral wandering as the tambour travels. Wood dowels in the system interact with the tambour configuration to help form the rolling radius, supporting consistent curvature where the door transitions from vertical to horizontal movement. Because the kits can be cut down to narrower widths and still function properly, the same track and door system adapts to different cabinet widths while retaining the described tension and guide behavior. This combination of defined slat dimensions, cloth backing, PVC guide rails, wood dowels, donuts, and tension spring gives a coordinated set of elements aimed at repeatable operation in appliance garage cabinet work.

Common Questions About The CO2-SCH-2 Tambour Set

Selecting This Cherry Tambour Kit For Your Opening

This Omega National CO2-SCH-2 cherry tambour door and spring tension track system provides a defined 24 inch wide by 18 inch high solid wood solution for appliance garages. The coordinated PVC guide rails, cloth-backed slats, wood dowels, donuts, and tension spring create a matched rolling path suited to cabinet work. When a project calls for a cherry, solid wood tambour front that can be cut down to a narrower width and still function properly, this kit aligns with that need. Use this CO2 Series set where a roll-up cherry front is required within the stated dimensions.