Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
NOTE: As of 4/13/26, Omega National's prefix has changed from NP to RS. This part number has changed from NPAG100SVR-24 to RSAG100SVR-24.
Omega National red oak appliance garage is a straight appliance garage assembly that helps organize countertop appliances under a vertical tambour door, so small equipment can stay ready to use while visually concealed. The AG-100 Series design uses an 18-3/4 inch high solid wood frame to house the tambour door, giving a defined opening height that works with many common counter appliance sizes. The frame works with a spring tension track system around the tambour door, so the door moves up and down with smooth, non-binding travel during daily use. The garage width of 24 inches gives space for multiple items in a single bay, which helps consolidate cords and clutter in one location. Red oak material ties the unit into red oak cabinet runs, keeping the appliance garage visually consistent with surrounding fronts. Wood veneer construction supports later finishing to match nearby casework.
The AG-100SVR-24 appliance garage uses a 24 inch width and 11-7/8 inch depth, which aligns with common counter depths and cabinet module planning. The solid wood frame height of 18-3/4 inches defines the vertical space the unit occupies under wall cabinets. Two 11 inch wide by 19 inch high veneer faced end panels in 3/8 inch thick MDF create the sides, so the installer works with consistent panel dimensions on both ends. The spring tension track system is built around the tambour door within the frame, so the functional components stay contained in the front structure during mounting. The wood veneer configuration allows finishing steps to be coordinated with surrounding millwork processes, tying the installed unit into the overall cabinet line.
This AG-100 Series red oak appliance garage is designed for use on kitchen countertops where a straight, 24 inch wide opening is planned beneath wall cabinets. The 11-7/8 inch depth aligns with typical counter depth, so the unit sits fully on the work surface while allowing the tambour door to travel within the footprint. The 18-3/4 inch high solid wood frame housing the tambour door sets the overall height that needs to be accounted for between the countertop and the cabinet above. Two 11 inch wide by 19 inch high veneer faced MDF end panels form the sides, providing a defined enclosure at each end of the 24 inch span. Red oak material and wood veneer faces make this unit a match for red oak cabinet programs where visual continuity across doors, drawer fronts, and specialty units is important in the finished run.
The AG-100SVR-24 straight appliance garage centers on a tambour door designed around a spring tension track system, which provides smooth, non-binding operation when the door is raised or lowered. Housing this mechanism in an 18-3/4 inch high solid wood frame keeps the track and door path controlled within a rigid structure, supporting consistent movement over time. The veneer wood tambour door option keeps the surface uniform for finishing, so the slats present as a continuous red oak appearance when closed. The 3/8 inch thick MDF end panels with veneer faces provide stable side walls, which helps the frame and tambour assembly stay aligned as part of the cabinet installation. Together, these elements create an appliance garage that opens and closes along a defined path, supporting repeatable door travel in everyday kitchen use.
The AG-100SVR-24 appliance garage is 24 inches wide and 11-7/8 inches deep, so it occupies a controlled footprint on the countertop when planned into a run.
The AG-100SVR-24 uses an 18-3/4 inch high solid wood frame, which defines the vertical opening height and the space required beneath wall cabinets.
The AG-100SVR-24 end panels are 3/8 inch thick MDF with veneer faces, giving stable side walls that can be finished along with surrounding cabinetry.
The AG-100SVR-24 tambour door is designed around a spring tension track system, which provides smooth, non-binding door travel during opening and closing.
The AG-100SVR-24 is a wood veneer straight appliance garage in red oak, so the visible faces present a veneer wood surface suited to red oak cabinet programs.
The AG-100SVR-24 uses two 11 inch wide by 19 inch high veneer faced MDF end panels, giving consistent side dimensions for planning the opening.
The Omega National AG-100SVR-24 appliance garage combines a 24 inch wide, 11-7/8 inch deep footprint with an 18-3/4 inch high solid wood frame, giving a clearly defined space for red oak countertop storage. The spring tension tambour door track system provides smooth, non-binding operation as appliances are accessed throughout the day. Veneer faced MDF end panels and the wood veneer tambour door support coordinated finishing with nearby red oak fronts. For projects calling for a straight red oak appliance garage with known dimensions and integrated tambour hardware, this AG-100 Series model provides a structured solution.
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  RSAG100SSAL-18 Mfr# AG-100SAL-18 | Omega National AG-100 Series Alder Appliance Garages 18"W x 11-7/8"D, Solid Wood - AG-100SAL-18 |
Sold In: 1 Each
