Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Steel table legs from the Peter Meier Heidelberg Series give a work surface or table a strong steel support with a load bearing capacity of 660 lbs per leg, which allows a single leg to carry substantial static loads in shop or commercial settings. This Camar leg uses a 3 inch diameter steel tube, so the support spreads weight over a broad footprint for stable performance on typical rigid substrates. The counter table height length of 27-3/4 inches positions the work surface at a standard table height when combined with typical top thicknesses. A built in 1-1/8 inch adjustable foot lets the installer raise or lower the leg within that range, which helps compensate for minor floor irregularities or align a run of tables. The chrome finish provides a bright metallic look that matches chrome hardware on other fixtures.
The leg features a non-visible adapter used to attach the leg to a table, which keeps the connection hidden from normal view so the installation reads as a clean cylinder meeting the underside of the top. This adapter-based connection defines a fixed interface point, allowing the installer to repeat the same mounting pattern across multiple units. Once installed, the built in 1-1/8 inch adjustable foot becomes the active adjustment mechanism, so final leveling can occur at floor level rather than at the top connection. Because the leg is 27-3/4 inches in length before adjustment, the leveling range sits at the bottom of the leg, which simplifies tweaks after the table or work surface is standing.
This Camar Heidelberg Series steel table leg with a 3 inch diameter and 27-3/4 inch length suits work surfaces or tables that need a defined table height with a visually substantial support. The steel construction tied to a 660 lb load bearing capacity per leg makes it suitable for work tops that carry concentrated loads at each corner or along a run, because each leg provides a strong vertical support point. The chrome finish presents a bright metallic surface, which fits environments where exposed table supports should align with other chrome elements, such as hardware or decorative metals. Because the foot is adjustable by 1-1/8 inches, the leg can adapt to small floor height changes across a room, so a series of tables can be brought into the same working plane.
The non-visible adapter that attaches the leg to the table creates a concealed mounting interface, which lets the installer position the structural fasteners out of normal sightlines while still anchoring the leg firmly to the top. By keeping this adapter hidden, the installation preserves the simple cylinder appearance from normal viewing angles, which matters when the leg is used in open or customer-facing areas. The 3 inch diameter gives a large contact zone at the floor, so the adjustable foot operates over a broad base, supporting stable fine-tuning as the 1-1/8 inch range is used. Because the leg length is specified as 27-3/4 inches for table height applications, plans can be drawn with that dimension in mind, and the adjustable foot then absorbs small real-world deviations without changing the designed top height.
This steel table leg is rated at a load bearing capacity of 660 lbs per leg, which supports heavy work surfaces when each support point stays within that static load range.
This Camar Heidelberg Series leg has a counter table height length of 27-3/4 inches, which establishes a standard table-height support before any adjustment is applied at the foot.
This table leg has a built in 1-1/8 inch adjustable foot, allowing the installed height to be raised or lowered within that range to level the work surface on uneven floors.
The leg uses a 3 inch diameter, which gives a broad structural column and stable floor contact for supporting loads up to the specified capacity per leg.
This table leg uses a non-visible adapter to attach to the table, creating a hidden connection that secures the leg while maintaining a clean cylindrical appearance from the outside.
This specific leg is supplied in a chrome finish, providing a bright metallic look that coordinates with chrome hardware or fittings on matching furniture or fixtures.
This Camar Heidelberg Series steel table leg in chrome combines a 3 inch diameter, 27-3/4 inch length, and 660 lb load bearing capacity per leg, giving a single support that is ready for demanding table or work surface applications. The built in 1-1/8 inch adjustable foot helps align finished heights across several supports, so layouts using multiple legs can be leveled to a shared plane. The non-visible adapter attachment keeps the structural connection hidden, maintaining a clean look where the leg meets the top. For projects calling for a chrome-finished, adjustable steel table leg at table height, this model provides a defined set of dimensions and performance characteristics to build around.
Sold In: 1 Each
