Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Steel table legs flat black from the Heidelberg Series provide a steel support solution for table-height work surfaces where a consistent finished height matters. Each Camar leg is part of Peter Meier's Heidelberg Series premium line of steel table legs and is designed for projects where the table structure must stay rigid under day-to-day use. The 27-3/4 inch table height length sets a standard work surface height before adjustment, which helps keep multiple tables or runs of tops at the same base dimension. A 3 inch diameter steel tube creates a broad footprint at the floor and at the top connection, spreading loads over more area. Each leg has a load bearing capacity of 660 lbs per leg, so one leg can support substantial point loads in heavy work surface applications. The flat black finish answers design jobs calling for a dark, uniform leg that visually recedes under the top.
Each leg has 1-1/8 inch adjustable feet that provide vertical tolerance when floors vary, giving enough travel to compensate for uneven substrates while keeping the table height within a controlled range. The non-visible adapter used to attach the leg to a table creates a defined mounting interface, so the connection occurs at a consistent point inside the leg rather than at an exposed bracket edge. This relationship between the adapter and the leg helps maintain a repeatable stance from leg to leg, which is important when setting up rows of tables. The 3 inch diameter pairs with the adapter and bracket to spread loads into the underside of the work surface, which supports stability when tables carry heavier items or see frequent movement.
The Camar steel table legs in flat black are part of the Heidelberg Series premium line of steel table legs, aligning them with applications where a finished steel support is visible beneath a work surface. At 27-3/4 inches in table height length, they suit standard-height tables or worktops where users sit or work at a conventional table level. The flat black finish lets these legs integrate under dark work surfaces or into interiors that favor a low-contrast look at floor level, which is useful in offices, shops, and workshop layouts. With a 3 inch diameter, each leg presents a substantial profile at both the top connection and the floor, which supports stability when tables are repositioned or when loads are placed near the edges. The 660 lbs per leg load bearing capacity supports heavier tops or equipment while maintaining a steel-based support structure.
The 1-1/8 inch adjustable feet built into each leg give installers enough range to handle typical floor variations while still landing close to the intended 27-3/4 inch table height, which helps keep banks of tables aligned visually. Because the leg features a non-visible adapter used to attach the leg to a table, the structural connection stays inside the leg, so the top shows a defined mounting point without exposed connection hardware. This consistent adapter interface supports repeatable installation from leg to leg, improving alignment on multi-leg tables. The 3 inch diameter steel tube resists point loading at the top and distributes weight down to the adjustable feet, which supports smoother leveling and reduces rocking when users shift weight. Working within the Heidelberg Series design, these Camar legs match other lengths and finishes in the same series, which helps projects carry a coordinated steel support look across different table or counter zones without changing the basic mounting logic.
The Camar steel table legs have a 27-3/4 inch table height length, setting a standard table-height work surface before the 1-1/8 inch adjustable feet are used for final leveling.
Each Heidelberg Series leg has a load bearing capacity of 660 lbs per leg, allowing a steel-supported table to handle heavy tops and concentrated loads at corners or edges.
The legs have built in 1-1/8 inch adjustable feet, giving vertical travel to deal with uneven floors while keeping the finished table height within a controlled range across multiple legs.
The leg features a non-visible adapter used to attach the leg to a table, so the structural connection occurs inside the leg for a cleaner appearance under the work surface.
The Heidelberg Series table legs have a 3 inch diameter, giving a broad steel column that helps distribute loads and support stable work surfaces in daily use.
This product describes the flat black finish option from the Heidelberg Series, matching projects that call for a dark, uniform steel leg under the table surface.
Camar steel table legs in flat black from the Heidelberg Series bring a 27-3/4 inch table height length together with 1-1/8 inch adjustable feet, so a standard worktop height can be dialed in across uneven floors. The 3 inch diameter steel construction and 660 lbs per leg load bearing capacity support heavy tops and active use where a rigid feel at the edge matters. With a non-visible adapter used to attach the leg to a table, the mounting point stays concealed while still delivering a defined structural interface. For projects that call for steel support, stable height, and a flat black finish, these legs provide a focused solution ready to integrate into table and work surface layouts.
Sold In: 1 Set
