Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Steel table legs 27-3/4 inch from the Peter Meier Heidelberg Series provide a counter table height support solution for work surfaces and tables, so installers can hit a consistent finished height using a single, defined leg length. The leg is part of Camar's table legs line, giving a metal support option when a steel structure is preferred on a project. A 3 inch diameter steel construction carries the load through a broad footprint, which helps distribute weight and support heavier tops in shop, office, or kitchen applications. Each leg is specified at a 660 lbs per leg load bearing capacity, so a bank of four legs can be planned confidently for substantial static loads on a work surface. The leg height of 27-3/4 inch establishes a base table height, while the adjustable foot fine-tunes the final elevation for alignment with adjacent cabinetry or tops.
The Camar steel table leg uses a non-visible adapter to attach the leg to the table, so the structural connection sits out of sight while still providing a secure interface to the underside of the top. This approach leaves the round 3 inch diameter section clear of mounting hardware, which is useful when the leg is fully exposed on islands or freestanding tables. The built in 1-1/8 inch adjustable feet give vertical travel at the floor, allowing small height changes without altering the fixed 27-3/4 inch leg tube. That adjustment range helps installers compensate for floor variations so the table can be leveled corner to corner. With a 660 lbs per leg load bearing capacity, the mounting approach and adjustment feature work together to carry substantial weight while keeping the top aligned with surrounding work surfaces.
The 620-7S-AO table leg is a 27-3/4 inch counter table height component, so it fits projects calling for standard table-height work surfaces in kitchens, offices, or shop layouts. Its place in the Peter Meier Heidelberg Series of steel table legs ties it to a recognized family, which is practical when matching legs across multiple runs of tables or between new and existing workstations. The 3 inch diameter profile complements substantial tops, allowing the leg to visually and structurally support thicker or wider surfaces. With a 660 lbs per leg load bearing capacity, this leg is suited to installations where concentrated loads from equipment, stacks of materials, or dense countertop materials need to be supported over time. The aluminum ridged finish lets the steel structure present as an aluminum-toned component, which works well alongside brushed hardware or metallic cabinet details.
The fixed 27-3/4 inch leg length on this adjustable steel table leg defines a repeatable starting dimension, so multiple legs on a run will sit at the same basic height before fine-tuning. The built in 1-1/8 inch adjustable feet provide the final adjustment range, giving installers a controlled way to dial in level and height without cutting the leg or altering the steel tube. The non-visible adapter used to attach the leg to a table keeps the connection consistent from project to project, which supports uniform positioning under tops and simplifies layout when spacing legs along a length. A 3 inch diameter steel construction matched with a 660 lbs per leg load bearing rating offers predictable strength, so designers can calculate leg count and placement with a clear capacity value. The aluminum ridged finish is one of four available finishes, which allows this leg to align visually with other Heidelberg Series legs that share the same structural format but differ in color or surface texture.
The steel table leg length of 27-3/4 inch sets a counter table height starting point, which establishes a standard table-height work surface before using the adjustable foot.
The steel table legs have a 660 lbs per leg load bearing capacity, which supports heavy tops and concentrated loads when planning the number and spacing of legs.
The legs have built in 1-1/8 inch adjustable feet that allow vertical adjustment, which helps level the table and match adjacent surfaces on uneven floors.
The leg features a non-visible adapter used to attach the leg to a table, which hides the mounting connection and leaves a clean cylindrical leg appearance.
Legs have a 3 inch diameter, which provides a broad steel support column to distribute loads and complement wider or thicker work surfaces.
The aluminum ridged finish is one of four finishes available, which lets this leg coordinate with other aluminum-toned or metallic elements in a work surface layout.
The Camar 620-7S-AO adjustable steel table leg from the Peter Meier Heidelberg Series combines a 27-3/4 inch counter table height with 1-1/8 inch of built-in adjustment, giving installers a clear way to set and fine-tune work surface elevation. Its 3 inch diameter steel construction and 660 lbs per leg load bearing capacity support substantial tops where structural performance and visual presence both matter. The aluminum ridged finish and non-visible adapter connection let the leg function as a strong structural element while presenting a clean profile in finished spaces. For projects that call for consistent table height, defined capacity, and an aluminum-toned steel support, this single-pack leg aligns with both design and load requirements.
Sold In: 1 Each
