Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Steel table legs from the Camar Heidelberg Series provide a steel support solution for counter table height projects where a consistent finished height is important. The legs are described as a premium line of steel table legs, so they are designed as structural components for work surfaces that need dependable support across multiple installations in a shop or on site. Each leg has a specified load bearing capacity of 660 lbs per leg, which supports heavier tops or dense materials while still staying within capacity on single-leg loads in a standard layout. The legs have a 3 inch diameter, giving a wider footprint that spreads weight over a larger contact area for added stability under loaded work surfaces. A stated 27-3/4 inch table height length targets typical counter table height applications, which helps align new builds or retrofits with other work surfaces using this same nominal height.
The leg features a non-visible adapter used to attach the leg to a table, creating a concealed connection that keeps the structural joinery out of sight while still securing the leg to the underside of the work surface. This non-visible adapter design focuses the visible portion on the cylindrical 3 inch diameter steel leg and finish, which can simplify visual alignment on open-leg tables or counters where the underside is exposed. The legs have built in 1-1/8 inch adjustable feet at the bottom of each leg, providing a defined adjustment range that allows subtle up or down changes to the installed height for each support point. That built in 1-1/8 inch adjustment range is useful when floors vary in flatness because small height differences at each leg can be dialed in to keep the counter table height working level consistent.
The Camar Heidelberg Series table legs are identified as a premium line of steel table legs in the work surface and tables category, so they are engineered for applications where structural performance and a finished appearance both matter. The 27-3/4 inch table height dimension is described as counter table height, positioning these legs for counters, worktables, or island-style surfaces that are built around that common working height. The 660 lbs per leg load bearing capacity supports installations with thicker tops, solid materials, or equipment loads that demand stronger vertical support at each corner or intermediate point. With a 3 inch diameter on each steel tube, these legs present a more substantial profile that suits open-plan counters, standalone tables, or commercial workstations where the leg itself becomes a visible design element. The availability of Aluminum Ridged, Flat Black, Chrome, and Brushed Steel finishes lets these legs be specified to align with surrounding hardware or appliance finishes in both residential and commercial workspaces.
The leg features a non-visible adapter used to attach the leg to a table, creating a repeatable mounting interface that anchors in the same concealed zone beneath the surface each time these legs are installed. This non-visible adapter approach helps standardize the mounting layout because the structural fasten point stays hidden, leaving the exposed 3 inch diameter steel column to appear uniform across multiple legs along a run. Each leg has built in 1-1/8 inch adjustable feet, which introduces a measurable adjustment window at floor level so installers can dial in final height without altering the main leg tube. That built in adjustability reduces the need for shims under the leg, supporting cleaner contact at the floor while maintaining a level 27-3/4 inch counter table height target at the surface. By using legs with a specified 660 lbs per leg load rating, installers can design support spacing knowing each leg carries a defined capacity, which supports repeatable layouts on similar projects using the same Camar 620-70-ST configuration.
The steel table legs are listed at 27-3/4 inch table height, which positions work surfaces at counter table height for projects planned around that working level.
Each Heidelberg Series steel table leg has a specified load bearing capacity of 660 lbs per leg, allowing use under heavier tops or concentrated loads within that rating.
The Camar steel table legs have built in 1-1/8 inch adjustable feet, which provide fine-tuning at floor level to achieve a level work surface on uneven floors.
The Heidelberg Series legs have a 3 inch diameter, giving a broader support column that enhances stability and provides a substantial visual profile on open-leg installations.
The leg features a non-visible adapter used to attach the leg to a table, so the structural connection is concealed while the leg itself remains visually clean.
The steel table legs are available in four finishes: Aluminum Ridged, Flat Black, Chrome, and Brushed Steel, supporting coordination with surrounding hardware and surfaces.
Camar steel table legs from the Heidelberg Series give you a defined 27-3/4 inch counter table height, a 3 inch diameter profile, and built in 1-1/8 inch adjustable feet to tune the final working level. The specified 660 lbs per leg load bearing capacity supports heavier tops in residential or commercial projects that demand stronger vertical supports. With finish options that include Brushed Steel along with Aluminum Ridged, Flat Black, and Chrome, these legs can be matched to a range of design schemes around cabinets and work surfaces. For projects where a premium line of steel table legs aligns with your work surface layout and height targets, this Camar 620-70-ST configuration is ready to be specified as a core structural component.
Sold In: 1 Set
