Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Fulterer 1204 is a 16 inch, white epoxy-coated steel Euro slide with soft-close damping, over-travel extension, and a 125 lb load capacity. It brings the entire drawer box out to and just past the cabinet face, then slows it to a silent, controlled close — an uncommon combination in the roller-slide class.
Most Euro slides are 3/4 extension, leaving the back of the drawer inside the cabinet at full open. This slide goes the other direction: over-travel pushes the drawer 1-3/16 inches past the cabinet face. That extra clearance matters under overhanging countertops, in front of deep face frames, and in any cabinet where a standard full-extension slide still puts contents just out of reach. Kitchen base cabinets tucked beneath a stone counter are a natural fit, as are pantry pull-outs where the overhang is deep enough to block a conventional slide. If the job calls for an epoxy slide that actually clears the opening completely, this is it.
Steel members carry a white epoxy powder-coat that holds up to the daily friction of drawer cycling and keeps the slide from standing out against a white or light-colored cabinet box interior. Nylon roller bearings run in the formed steel tracks. Unlike the segment's standard 75 lb class, the 1204 is rated at 125 lb, so it handles drawer loads that would tax a standard Euro slide without adding the cost of a full ball-bearing telescopic system. The soft-close mechanism is a true damper, not a self-closing ramp — the drawer slows and lands quietly rather than pulling home with a snap.
Cabinet shops standardized on epoxy Euro slides who need soft-close and genuine over-travel will find the 1204 a useful top-of-line option in the roller-slide category. Renovators and designers specifying kitchen or vanity cabinetry with deep overhanging countertops get the access clearance without stepping up to a full ball-bearing undermount system. The non-handed design simplifies ordering at any quantity: one part number stocks both sides. At 1/2 inch side clearance per side, the drawer box runs 1 inch narrower than the cabinet opening — the standard Euro-slide formula.
No. Self-close is a ramp that pulls the drawer shut with a positive snap; soft-close is a damper that slows the drawer over the last inch or so and settles it silently. The Fulterer 1204 uses soft-close damping.
The drawer extends 1-3/16 inches past the face of the cabinet at full open, rather than stopping flush. Under a countertop with an overhang, or in front of a thick face frame, that extra clearance is what lets you reach the back of the drawer without interference.
No. This slide is non-handed, so the same part works on both sides of the drawer. One product line item covers a complete installation.
Allow 1/2 inch of clearance per side, which means the drawer box runs 1 inch narrower than the inside width of the cabinet opening.
Yes, with appropriate rear support. Face-frame cabinets set the side panel back from the opening, so the back end of the slide needs a rear mounting bracket or socket. Check that the bracket is compatible with this Fulterer series before ordering.
The Fulterer 1204 delivers over-travel clearance and genuine soft-close damping in a standard Euro-slide footprint, making it a strong choice wherever a 16 inch white epoxy slide needs to do more than the segment default.
Sold In: 1 Set
