Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Fulterer 1262 is a 30 inch, full-extension, soft-close epoxy Euro slide with 1-3/16 inch of over-travel and a 125 lb load rating. It is sold as a complete, non-handed set that covers one drawer, in white epoxy on a steel roller-bearing frame.
Most Euro slides stop at the cabinet face when fully extended. That works fine in open-face-frame and frameless cabinets with shallow overhangs, but a kitchen island, a thick countertop, or a deep face frame can block access to the back of the drawer even with a full-extension slide underneath it. The 1-3/16 inch of over-travel on the Fulterer 1262 pushes the drawer box past the obstruction, restoring usable access to the rear of a 30 inch drawer box. That also makes it the right choice for file drawers under a worksurface, waste-bin pull-outs behind a wide face frame, and pantry drawers where the user needs to see and reach the full drawer depth without leaning in.
The 1262 runs on nylon roller bearings over a steel epoxy-coated track — the Euro roller platform trades the feel of a precision ball-bearing telescopic for a quieter, lighter roll that suits production cabinet work. The white epoxy coat over steel is a color-match finish, not a structural layer: it does its job inside a painted or white-laminate cabinet interior. At 30 inches this is the longest slide in the Fulterer epoxy Euro line, suited to deeper cabinet runs where shorter Euro slides run out of length. The soft-close on this model is a genuine damper, not a self-closing ramp — the drawer decelerates through the last stretch of travel and lands quietly. Side clearance is 1/2 inch per side, so the drawer box runs 1 inch narrower than the cabinet interior opening.
Cabinet shops building islands, peninsulas, or wall cabinets with thick stone overhangs reach for this slide when they need the economy and color-match of an epoxy Euro platform but cannot give up rear-drawer access. Designers specifying handle-less or inset-front kitchens where the face frame adds depth to the opening find the over-travel essential. Contractors retrofitting an older kitchen with a new island top — without rebuilding the box — also land here: the over-travel buys back the access the thicker top takes away. The 125 lb rating supports drawers that carry real weight, not just flatware.
Both terms apply. The drawer member extends the full length of the slide, which is the full-extension class. Over-travel means it then continues an additional 1-3/16 inches past that point, carrying the box beyond the cabinet face to clear overhangs.
This listing is a complete, non-handed set for one drawer. Both sides are included in a single line item, and because the slide is non-handed, both pieces are identical.
A self-closing ramp pulls the drawer shut with a spring-loaded cam — the close is positive and can be abrupt. The soft-close on the 1262 is a hydraulic or mechanical damper that decelerates the drawer over the last portion of travel, settling it shut quietly. The two are not interchangeable terms.
Yes, with the right rear support. Face-frame cabinets require rear mounting brackets or sockets at the back of the slide to support it where the cabinet side is set back from the frame. Those brackets are series-specific and sold separately; confirm compatibility before ordering.
Match the drawer box depth to the 30 inch nominal slide length, and confirm your cabinet interior depth provides enough clearance behind the slide's rear end. Undermount-style box-length formulas do not apply here; this is a side-mount Euro slide.
When 28 inches is not long enough and a standard full-extension slide cannot clear the overhang, the Fulterer 1262 is the slide to reach for: 30 inches of length, 1-3/16 inches of over-travel, soft-close damping, and a 125 lb rating on a white epoxy platform that disappears into the cabinet.
Sold In: 1 Set
