
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
This is a Fulterer FR6500 series 20 inch soft-close epoxy-coated Euro slide — a white, unhanded, side-mount roller slide with full extension, integrated soft-close damping, and over-travel built into the design. Where standard Euro slides leave the back of the drawer inside the cabinet, this one brings the entire drawer out to the face — and then a little further.
A standard 3/4-extension Euro slide works fine for everyday utensil and closet drawers. The Fulterer FR6500 is for situations where the rear of the drawer actually has to be reachable: deep pots-and-pans drawers under counter overhangs, file drawers beneath a desktop, utility drawers in a workshop cabinet where the back row of the box is part of the working storage. The 1-3/16 inch over-travel carries the drawer past the cabinet face far enough to clear moderate overhangs and deep face frames, so the contents are accessible rather than just technically exposed.
The FR6500 runs on roller bearings housed in a steel body finished in white epoxy powder coat. Roller-bearing Euro slides are quieter under light to moderate loads than telescopic ball-bearing designs, and the white epoxy finish is specifically intended to disappear against white melamine cabinet interiors. The side clearance is 1/2 inch per side — build the drawer box 1 inch narrower than the inside cabinet opening. The slide is non-handed, so the same part number mounts on the left and right without modification. The soft-close mechanism is built into the slide body: no separate damper clip to attach or lose during installation.
Cabinet shops and contractors specifying a full-access Euro slide on projects where the budget allows a step up from standard 3/4-extension roller slides will find the FR6500 the most direct match. Homeowners doing a kitchen renovation and prioritizing pots-and-pans or spice drawer access — with white interiors — will get both the full reach and the soft landing. At 125 lb, the load rating covers realistic drawer loads in residential and light commercial work without needing to move up to a paired ball-bearing side-mount slide. This is an indoor slide for dry cabinet environments.
Yes. This listing is the complete slide set — both the left and right slides — for one drawer. One line item, one drawer.
Full extension brings the drawer even with the cabinet face. Over-travel goes a step further — on this slide, 1-3/16 inch past full extension — so the drawer clears a counter overhang or a deep face frame and the back of the box is fully reachable.
It is a damper. The FR6500 catches the drawer near the end of closing travel and slows it to a quiet stop. That is soft-close, not the undamped self-closing ramp found on standard Euro slides.
No. This slide is non-handed — the same part installs on either side of the drawer without modification.
The FR6500 is a side-mount slide. In a face-frame cabinet, the slide's back end needs support — check whether a rear mounting bracket or socket is required for your specific installation before ordering. In a frameless cabinet, it mounts directly to the panel.
The Fulterer FR6500 20 inch slide delivers what standard Euro slides cannot: the full drawer out of the cabinet, a quiet damped close, and a 125 lb rating that handles real working loads — all in a white finish that stays invisible against the cabinet interior.
Sold In: 1 Set