Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Fulterer 1263 is a 32 inch, over-travel, soft-close epoxy-coated Euro slide in white — a roller-bearing, side-mount slide that goes a step beyond full extension to clear countertop overhangs and deep face frames, while a built-in damper settles every close quietly.
Standard full-extension slides bring the drawer flush with the cabinet face — useful, but not enough when a countertop overhang or a thick face frame sits in the way. The 1263's 1-3/16 inch of over-travel pushes the drawer body past that obstruction, putting the back of the drawer within reach without awkward leaning. Deep pantry cabinets, tall base units under overhanging counters, and any drawer where the last few inches of content routinely go untouched are the situations this slide was built for. At 32 inches, it also suits the longer cabinet runs that shorter Euro slides cannot reach — closet organizers with deep boxes, wide kitchen base drawers, and full-depth shop cabinets all fit the profile.
The 1263 runs on nylon roller bearings in an epoxy powder-coated steel body. White epoxy is the finish standard for production cabinetry with white interiors, and the powder-coat bake keeps the color consistent across a full run of cabinets. The soft-close damper is integrated into the slide, not an add-on, so the closing action is part of the mechanism from the start — no extra parts to source or retrofit. That damped close is distinct from the self-closing ramp on standard Euro slides: the drawer decelerates and settles quietly rather than snapping shut on a ramp. The slide is non-handed, which matters on larger jobs where keeping left and right SKUs straight slows down production.
Cabinet shops building deep kitchen bases or pantry units under countertops with significant overhang will find the over-travel spec solves a real access problem without switching to a heavier undermount system. Designers specifying handle-less or minimalist cabinetry where soft-close is expected as a baseline will appreciate the damper working without any visible hardware. Contractors replacing worn slides in existing deep cabinets can order this non-handed slide without worrying about which side of the opening they are working on. At 125 lb capacity on a roller-bearing Euro platform, it also punches above the typical 75 lb Euro-slide class, covering heavier drawer loads that would otherwise push the spec into a ball-bearing side-mount.
It is over-travel. The 1263 extends 1-3/16 inch past the cabinet face at full open, which is what separates it from a standard full-extension slide that stops flush with the opening.
A self-closing Euro slide uses a mechanical ramp that pulls the drawer shut with a positive snap once it enters the capture zone — there is no damping. This slide's soft-close damper decelerates the drawer over the last portion of travel and settles it silently. The result is a noticeably quieter, more controlled close.
No. Thirty-two inches is the closed length of the slide. With over-travel, the drawer member extends beyond the slide length — 1-3/16 inch past the cabinet face — but the slide length drives your cabinet depth requirement, not the travel distance.
No. The 1263 is non-handed, so one part number covers both sides of the drawer. Order two of this SKU per drawer.
The slide itself mounts via screws on the side, but face-frame installations typically need rear mounting sockets or brackets to support the back of the slide where the cabinet side is recessed behind the frame. Check that your rear support hardware is compatible with this slide before installing in face-frame construction.
When the countertop overhang or cabinet depth makes a standard slide fall short, the 1263's over-travel extension and soft-close damper close the gap — in both senses — without adding complexity to the order or the install.
Sold In: 1 Set
