Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Fulterer 1207 is a 22 inch full-extension, soft-close epoxy-coated Euro slide in white — a roller-bearing, side-mount slide that brings the entire drawer out to the cabinet face and settles it shut with a damped close. It is sold as a complete set for one drawer, no handed matching required.
Most Euro slides are 3/4-extension products — the back of the drawer stays inside the cabinet. The Fulterer 1207 runs past that: it is a full-extension slide with 1-3/16 inch of over-travel, so the drawer clears the cabinet face entirely and then some. That extra reach pays off on deep base cabinets where a spice tray or utensil drawer otherwise hides its rear contents, and on face-frame builds where the frame itself eats into the opening. If the application is a standard wall cabinet where 3/4 extension is plenty, a standard Euro slide will cost less. If the drawer needs to come all the way out, this is the slide that does it.
The 1207 is epoxy powder-coated steel in white — a baked finish that holds up to daily contact and blends with white melamine interiors. Nylon roller bearings carry the load quietly along the steel profiles. The soft-close mechanism is a true damper: it catches the drawer in the last portion of travel and slows it to a silent, controlled landing. This is meaningfully different from the self-closing ramp common on standard Euro slides. A self-close ramp pulls the drawer shut with a positive snap; a soft-close damper slows it down. The 1207's damper makes it appropriate for kitchen and bath installations where quiet close matters. The side-mount configuration requires 1/2 inch of clearance per side, so the drawer box should be built 1 inch narrower than the inside cabinet opening.
The 1207 fits cabinet shops and contractors who want the economy of an epoxy Euro-slide platform but need full extension and soft-close performance — the combination that most standard Euro slides do not offer. It works well in base cabinet kitchen drawers, bath vanity drawers, and built-in furniture pieces where the drawer must open completely and close quietly. The 125 lb capacity also opens the slide up to heavier-duty applications that would overload a standard 75 lb Euro slide. Homeowners tackling a kitchen refacing job who want an upgrade over existing 3/4-extension slides will find the 1207 is a direct side-mount replacement that adds both full access and a soft-close feel without moving to a concealed undermount system.
No. Standard Euro slides use an undamped ramp that pulls the drawer shut with a positive snap — that is self-close. The Fulterer 1207 has an integrated soft-close damper that slows the drawer through the last portion of travel, producing a quiet, cushioned landing. The two feel noticeably different in use.
Over-travel means the drawer extends 1-3/16 inch past the full-extension point — past the cabinet face — so the entire drawer box is exposed and even the rearmost contents are reachable without tilting the drawer or reaching blind.
No. The 1207 is non-handed — the same slide installs on both sides of the drawer. One set covers both sides.
The slide requires 1/2 inch of side clearance per side, so build the drawer box 1 inch narrower than the inside cabinet opening to leave equal clearance on both sides.
The 1207 is a side-mount slide and can be used in face-frame construction, but face-frame installs typically require rear mounting brackets or sockets to support the back of the slide — check that the rear support hardware is in place before ordering.
The Fulterer 1207 delivers the full-extension reach and soft-close feel that most Euro slides skip — without stepping up to a concealed undermount system. Add one set per drawer and the job is done.
Sold In: 1 Set
