Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
3M Trizact 5 inch sanding disc uses 3M 268XA abrasive on film with precisely shaped pyramids of micron grade mineral, so the abrasive structure delivers controlled cutting action that supports predictable finishing results on detailed work. The disc is 10 micron with a no hole design, which focuses the cut over the full 5 inch face for uniform fine sanding when a high gloss level is required. The abrasive uses aluminum oxide on film, giving a stable backing that helps the disc stay flat and track evenly over the surface for consistent contact. As the pyramids wear away, they continually expose fresh abrasive, which maintains a consistent cut over the life of the disc instead of tapering off quickly. The disc uses a PSA attachment, so it bonds securely to compatible backup pads and stays in place during extended sanding passes.
This 5 inch sanding disc uses a PSA, or pressure sensitive adhesive, backing so it attaches directly to a compatible flat pad, giving a secure bond across the full disc for stable sanding. The aluminum oxide on film construction keeps the disc flexible yet dimensionally consistent, so it follows slight contours while maintaining even pressure and scratch formation. The no hole design means the work surface contacts abrasive across the entire disc face, which supports uniform fine finishing when dust extraction through the disc is not required. Because the pyramids of micron grade mineral continually expose fresh abrasive as they wear, the cut stays predictable from the first part to later passes, which supports dialing in process times and gloss levels.
This 3M 268XA abrasive on film disc is used when a high gloss level is required, so it fits into finishing stages where visual appearance and surface refinement are critical. The 10 micron grade targets very fine sanding, so it typically follows coarser steps to refine the scratch pattern and prepare surfaces for final presentation. Because the disc can be used wet to achieve desired finishes, it fits applications where water or coolant is part of the sanding method to control heat and debris. The no hole, 5 inch format keeps abrasive coverage continuous across the working face, so it supports smooth, even passes on flat pads sized for that diameter.
The precisely shaped pyramids of micron grade mineral are designed to wear away gradually, so as each pyramid breaks down, fresh abrasive is exposed and the disc continues to cut consistently. This behavior reduces the drop-off in performance seen with regular sandpaper, allowing extended disc life up to 10 times longer than regular sandpaper and supporting more parts per disc in industrial or occupational workflows. Because the cut remains steady, operators can maintain predictable cycle times and gloss targets without frequent disc changes. The aluminum oxide on film backing keeps the abrasive layer uniform, so scratch depth stays controlled as the disc wears. With the Stikit PSA system providing firm attachment, the disc stays aligned on the pad during extended sanding, which helps maintain even contact and reduce rework from uneven finishing.
This disc uses 3M 268XA abrasive on film with precisely shaped pyramids of micron grade mineral, so the cut stays controlled and supports consistent finishing results over multiple passes.
The disc is 10 micron, so it targets very fine sanding where a high gloss level is required, helping refine previous scratch patterns before final appearance steps.
This 3M Trizact disc can be used wet to achieve desired finishes, so water or coolant can be part of the process to control heat and residue.
The disc uses aluminum oxide on film with a Stikit PSA backing, so it bonds across the pad surface and supports quick disc changes on compatible PSA pads.
The precisely shaped pyramids wear away to expose fresh abrasive, so the disc maintains a consistent cut and offers extended disc life up to 10 times longer than regular sandpaper.
This 3M Trizact disc is used when a high gloss level is required, so it fits late in the sanding sequence where fine finishing and appearance are critical.
The 3M Trizact 5 inch sanding disc pairs 10 micron grade with 3M 268XA abrasive on film, so it supports high gloss finishing where control and repeatability matter. The precisely shaped pyramids of micron grade mineral expose fresh abrasive as they wear, extending disc life up to 10 times longer than regular sandpaper to support longer production runs per disc. With its Stikit PSA backing and no hole design, the disc maintains full-face contact on compatible pads, helping deliver uniform fine sanding when a refined final surface is required.
Sold In: 1 Roll
