Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Belwith Keeler Zephyr appliance pull is a 13 inch center to center handle designed for appliance-scale doors and large cabinet fronts. The 13 inch center to center dimension sets consistent hole spacing, which supports straight-line layouts across tall fronts. The overall length of 14-1/2 inches gives extra grip length along the door, which helps when opening heavier panels. The pull projects 1-7/8 inches from the surface, providing hand clearance between the door face and your fingers. A width of 1-1/2 inches creates a substantial gripping area, which can feel secure on wider doors. The Zephyr collection design uses rounded shaping, which produces a smooth contour at touch points. The stainless steel finish presents a stainless look, which can align visually with common appliance and hinge finishes. The pull is made from zinc, which provides a solid metal body for the handle.
This 13 inch center to center appliance pull mounts through the door or drawer with two fastener points spaced 13 inches apart, which establishes a repeatable drilling pattern. The fixed center spacing supports jigs or templates built for 13 inch pulls, which can speed layout on multiple fronts. With a 14-1/2 inch overall length, the ends extend beyond the mounting holes, which can visually balance wide appliance or pantry doors. The 1-7/8 inch projection creates clearance between the pull and the surface, which can reduce interference with door reveals. The 1-1/2 inch width presents a stable mounting footprint, which distributes hand force across a wider area of the door face.
The Zephyr series appliance pull, with its 13 inch center to center dimension, suits full-height cabinet doors or appliance panels that benefit from longer handles. The 14-1/2 inch overall length supports use on tall pantry doors where extended hardware helps with reach. The stainless steel finish visually pairs with stainless-finished appliances, which can align door hardware with surrounding equipment fronts. The width of 1-1/2 inches makes the pull feel substantial on larger doors, which helps it scale correctly on wide drawer banks. The Zephyr collection styling offers a modern, rounded look, which can support contemporary cabinet designs. The 1-7/8 inch projection works on face frame and frameless fronts where finger clearance in front of the door is important.
The fixed 13 inch center to center spacing allows repeated drilling using the same measurements, which helps reduce layout errors across a run of cabinets. The 14-1/2 inch overall length provides visible reference points at the ends of the pull, which can help align hardware with door rails or panel breaks. The 1-7/8 inch projection sets the handle off the door at a predictable distance, which supports uniform clearances from cabinet to cabinet. The 1-1/2 inch width gives the installer a stable bearing surface against the door, which can help keep the pull square while fasteners are tightened. The zinc construction creates a solid handle body, which supports consistent feel when matching multiple pulls throughout a room. The stainless steel finish offers a unified surface color, which maintains a consistent appearance when several pulls are installed side by side.
The Belwith Keeler Zephyr appliance pull has a 13 inch center to center measurement, which sets the spacing for drilling and aligns with layouts designed around 13 inch pulls.
The Zephyr appliance pull measures 14-1/2 inches in overall length, which extends grip length beyond the 13 inch mounting centers for use on taller or wider doors.
The appliance pull projects 1-7/8 inches from the mounting surface, which provides hand and knuckle clearance in front of cabinet doors or appliance panels.
The Zephyr series pull is made from zinc with a stainless steel finish, which creates a metal handle body with a stainless-look surface for coordinating hardware.
The 13 inch center to center and 14-1/2 inch overall length position this Zephyr appliance pull for larger cabinet doors or appliance panels needing a longer handle.
This stainless steel finish Zephyr appliance pull is identified by manufacturer part number P2289-SS, which distinguishes it within the Zephyr collection.
The Belwith Keeler Zephyr appliance pull combines a 13 inch center to center layout with a 14-1/2 inch overall length, which serves appliance-scale and tall cabinet doors. The zinc construction with stainless steel finish delivers a stainless-look handle body across installations. With 1-7/8 inch projection and 1-1/2 inch width, the pull offers usable clearance and grip area. For projects calling for a modern Zephyr series handle with these exact dimensions and finish, this P2289-SS pull from Wurth Baer Supply aligns with that specification.
Sold In: 1 Each
