Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Belwith Keeler Studio Series cup pull gives cabinets a defined handhold using a 3 inch center to center layout that sets two mounting points at a common cabinet drilling size, which helps align with many standard face frame or frameless layouts during layout work. The zinc die cast material creates a solid, uniform pull body, so the handle feels consistent from piece to piece when a job uses multiple openings in the same run. The Venetian Bronze finish provides a dark, traditional tone on the pull surface, which helps this handle visually tie into other bronze-colored decorative hardware in a space. The 4-7/8 inch overall width spreads the grip area across more of the drawer front, spreading user force over a wider area of the facade. A 1 inch projection sets the cup away from the drawer face, which gives fingers defined clearance when grabbing the pull on busy kitchen, bath, or shop cabinetry.
The 3 inch center to center measurement defines the main drilling distance, so installers can set their boring jigs or templates to 3 inches when preparing drawer fronts for this Studio Series cup pull. The reference to 3-3/4 inch center to center in the description adds another measurement that can be used when planning layouts that call for that spacing on related hardware. The 2 inch length or diameter detail specifies a key dimension of the pull body, which helps drafters confirm how much flat area on the drawer front should be clear for mounting. The 1 inch projection figure gives the stand-off distance from the face, so tradespeople can evaluate clearance in tight walkways or near adjacent doors during layout. The screw size of 8-32 by 1 inch points to the threaded interface, which lets installers match drill bit pilot sizes and tool choices for fastening through standard cabinet fronts.
This Belwith Keeler Studio Series cup pull is part of the decorative hardware and moldings handles and pulls category, so it is suited to cabinet and furniture door or drawer fronts where a cup-style grip is desired. The 3 inch center to center layout matches a widely used mounting standard on many cabinetry lines, which helps when specifying hardware for kitchen, bath, or built-in storage runs that repeat the same drilling pattern. The Venetian Bronze finish positions the pull for projects that use bronze-toned hinges, knobs, or other trim, tying multiple elements together visually. With a 4-7/8 inch width and 1 inch projection, the pull can serve on both small and mid-size fronts, giving enough hand space without overwhelming narrower faces.
The zinc die cast material used for this cup pull allows the manufacturer to hold tight shapes and edges, which supports consistent alignment when several pulls are lined up across drawer banks. The defined 3 inch center to center spacing lets installers rely on their standard jigs for repeat drilling, reducing layout variation from piece to piece. The listed 3-3/4 inch center to center figure provides an additional reference point that can guide planning when coordinating with other pulls in the same Studio Series collection. The 1 inch projection keeps the pull profile low while still giving finger clearance, which can reduce interference with nearby doors or appliance faces. The 2 inch length or diameter dimension helps CAD users and shop staff check that the pull body fits comfortably within rail and stile widths on custom fronts, supporting cleaner visual proportions on finished work.
The Belwith Keeler Studio Series cup pull uses a 3 inch center to center measurement, which sets the hole spacing for mounting on cabinet doors or drawers using standard boring setups.
The P3013-VBZ Studio Series cup pull uses a Venetian Bronze finish, which matches other bronze-toned decorative hardware when coordinating a cabinet or furniture project.
This Belwith Keeler Studio Series cup pull is made from zinc die cast, providing a consistent pull body that supports uniform sizing across multiple installed pieces.
The Studio Series cup pull has a 1 inch projection, setting the grip away from the cabinet face to provide finger clearance while keeping the profile controlled.
The cup pull has a 4-7/8 inch overall length, giving a wider stance on the door or drawer front for a balanced look and a broad grip area.
The P3013-VBZ pull uses 8-32 by 1 inch screws, which guides drill bit and driver selection when fastening through typical cabinet front thicknesses.
The Belwith Keeler Studio Series cup pull with 3 inch center to center spacing, zinc die cast construction, and Venetian Bronze finish offers defined dimensions and a clear drilling pattern that support efficient layout on cabinet or furniture fronts. The 4-7/8 inch width, 1 inch projection, and 2 inch length or diameter detail help installers and designers align this pull with drawer sizes and adjacent hardware on both new builds and refresh work. For projects that call for a bronze-toned cup pull with documented center to center measurements and a known screw interface, the P3013-VBZ part number from Wurth Baer Supply provides a specific, repeatable choice.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  SZ126SN Mfr# SZ126SN | PRO LUXE Studio Satin Nickel 1-1/4" (32 mm) L x 1-1/4" (32 mm) W Knob, SZ126SN |
