Clamex 6mm 90˚ Cover Cap, Ivory/Pine/Oak (100/Box)

Clamex 6mm 90 Degree Cover Caps For Joints

Clamex 6mm 90 degree cover cap gives you a branded way to finish exposed Lamello Clamex connections so the joint area looks intentional instead of like an open fastener point. The Lamello name behind this cap signals that it is engineered for Clamex 6mm connectors at 90 degree joints, so the geometry of the cap is matched to that joint style rather than being a generic plug. The product is identified as a cover cap, which tells you it is designed to close off the visible access point of the Clamex fastener after assembly, helping the finished piece read as clean and continuous. Because the cap is matched to 6mm Clamex use, the visual scale of the cap suits typical biscuit-style joints in furniture and cabinetry that use that connector size.

Key Details Of Lamello Clamex 6mm Cover Cap

• The Clamex 6mm 90 degree cover cap identity ties this part directly to 6mm Clamex connectors at 90 degree joints, so you are addressing that specific joint scenario instead of treating it as a general plug solution.
• The brand Lamello on the Clamex 6mm 90 degree cover cap means the cap is specified for the same connector family as the joint hardware, helping keep part selection consistent across a project using Clamex fasteners.
• The color set Ivory/Pine/Oak listed for the Clamex 6mm 90 degree cover cap provides multiple wood-tone style choices, letting you choose a closer visual match to surrounding surfaces for less noticeable cover points.
• The Clamex 6mm 90 degree cover cap is described as a fastener component in the dowels and biscuits category, so it is meant to work at the joint rather than as a decorative part elsewhere on the cabinet.
• The count of 100 for the Clamex 6mm 90 degree cover cap supports runs of multiple Clamex joints on a job, so you can cover a series of connectors on a project without changing over to another cap style.

Using Clamex 6mm 90 Degree Cover Caps On Work

The Clamex 6mm 90 degree cover cap is set up for 90 degree joint locations where you have used a Lamello Clamex 6mm connector, so the working assumption is that the joint opens on a corner or carcass angle rather than along a flat surface. Because it is a cover cap within the Lamello Clamex system, its role is to occupy the exposed connector access after tightening, allowing that point on a cabinet, shelf, or similar assembly to present as a small, shaped cap instead of an open connector recess. The Ivory/Pine/Oak color description gives you three tone families to align with common light to mid wood looks, helping the cap sit closer to the surrounding panel color when choosing between those options on site.

Where Clamex 6mm Caps Fit And Why They Matter

Using Clamex 6mm Caps At 90 Degree Joints

The Clamex 6mm 90 degree cover cap is identified specifically for 90 degree applications, which points it toward corner joints such as cabinet boxes, carcass frames, or right-angle furniture connections built with Lamello Clamex 6mm hardware. Because the cap is part of the Clamex naming, it aligns with joints created using Clamex biscuits in the 6mm class, so the visible point you cap is the same diameter relationship as the connector behind it. The fasteners, dowels, and biscuits category signals that this part is for structural connection points, not for unrelated trim spots, which focuses its use on actual joint access areas. With the Ivory/Pine/Oak identification, you can align cap choice to lighter or warmer wood tones, so a run of 90 degree Clamex joints on similar material keeps a consistent appearance at every cap location.

Why Lamello Clamex 6mm Caps Support Clean Results

The Lamello Clamex 6mm 90 degree cover cap exists to finish the access point of a Clamex connector, so the fastener opening on the surface becomes a small, deliberate cap instead of a visible connector profile, which helps the overall piece read as more unified. Being a Lamello-branded part paired with Clamex and 6mm in the description, the cap remains within the same engineered family as the concealed connector, so the scale and naming track together from connector to cover point. The color group Ivory/Pine/Oak is oriented to common cabinet and furniture tones, which means a bank of cabinets or a multi-shelf unit using those shades can keep visual disruption lower at every Clamex joint. The 100 count designation lets that same look repeat across many joints on a project, so appearance from one cabinet or panel to the next stays predictable.

Common Questions About Lamello Clamex 6mm 90 Degree Caps

Select Clamex 6mm Caps For Your Joint Finish

The Clamex 6mm 90 degree cover cap from Lamello provides a purpose-made way to finish 6mm Clamex joints at right angles with a cap scale and color range aligned to Ivory, Pine, and Oak tones. With the Lamello 335282 part number and 100 count description, this cap is positioned for runs of cabinet or furniture joints using 6mm Clamex connectors where the visible access point should read as a small cap instead of an open connection. For work built around Clamex 6mm hardware at 90 degree joints, this cover cap lets the connector line and the finished surface presentation stay within the same system.