Clamex 6mm 90 degree cover cap gives a finished look to Clamex-style biscuit joints, so fastener openings at 90 degree connections present as clean and uniform in visible areas. The window gray color provides a neutral tone that visually blends with many laminate and painted cabinet finishes where the connector point would otherwise remain exposed. As a Lamello part, this cover cap matches the 6mm Clamex connection format, so it works with that established joint layout without changing your drilling or assembly pattern. The defined 90 degree designation identifies its use at right angle joints, which aligns with common cabinet carcass and frame construction where exposed connector points often fall on end panels or interior walls.
Clamex 6mm 90 degree cover cap integrates into assemblies that already rely on the 6mm Clamex system, so there is no change to the core joint geometry during layout or machining. The 90 degree reference aligns with typical perpendicular cabinet and casework joints, allowing installers to treat this cap as a finishing step applied after connecting the panels. Because it is identified as a cover cap rather than a connector, it functions as a surface finish element over the visible connection point, which lets production crews separate structural joining from cosmetic closure in their workflow. The window gray designation gives specifiers a consistent color callout when documenting cabinetry or fixtures that use gray-toned visible connectors.
Clamex 6mm 90 degree cover cap is matched to the 6mm Clamex concept, so it aligns with projects that already specify that joint style in cabinet or furniture construction. The 90 degree label focuses its use on right angle panel and carcass corners, which commonly expose connector points on interior or exterior faces. In these locations, the cap provides a discrete closure over the connection opening, so finished panels read as more continuous even when the joint line remains accessible. Because this part is defined as a cover cap within the Lamello family, it plays a finishing role in assemblies where the structural work has already been handled by the internal Clamex fastener components.
The 6mm designation ties the cap directly to a specific Clamex size, so shops standardizing on that joint dimension can stock one finishing part that matches their existing drilling and routing setup. The window gray color matters on visually exposed cabinetry and fixtures, because it creates a deliberate gray accent or neutral field rather than an uncoordinated connector opening. For production work, the manufacturer part number 335287 provides a clear identifier for reordering, so planners can call out the exact 6mm, 90 degree, window gray cap on drawings and job lists. The Lamello branding signals that this finishing component belongs to the same design family as the Clamex fastener system, which helps keep joint appearance consistent wherever those connectors are specified.
Clamex 6mm 90 degree cover cap is for 90 degree, right angle joints built around the 6mm Clamex connection format, so it targets perpendicular cabinet and casework assemblies.
Clamex 6mm 90 degree cover cap uses the 6mm designation, so it aligns with 6mm Clamex-style joints and lets shops keep one consistent size standard across connecting and finishing.
Clamex 6mm 90 degree cover cap in window gray offers a neutral gray tone, so visible connector areas can blend with gray-oriented cabinet finishes rather than standing out sharply.
Clamex 6mm 90 degree cover cap is a Lamello part, so it is identified as part of the Clamex connection concept and aligns with Lamello joint layouts used in cabinetry projects.
Clamex 6mm 90 degree cover cap uses manufacturer part number 335287, so buyers and planners can precisely reference this 6mm, 90 degree, window gray version in orders and drawings.
Clamex 6mm 90 degree cover cap separates joint finishing from structural fastening, so crews can assemble with Clamex connectors first and then close visible points with a matching cap.
Clamex 6mm 90 degree cover cap in window gray lets you bring structural 6mm Clamex joints and visible surfaces into the same planned system, so joints at right angles read as intentional design details. With the Lamello name and part number 335287, shops and installers can specify, stock, and repeat the same gray-toned finishing solution wherever these 6mm Clamex connections appear in cabinet or furniture projects. Select this cover cap when your layout already relies on the Clamex 6mm format and you want a defined, repeatable way to close off connector points in a neutral gray tone.
Sold In: 1 Package